Search

In Stock

Simplified Calorimeter

Calorimètre simplifié Features a dual-layered, impact-resistant enclosure with an exceptionally low thermal conductivity coefficient to ensure maximum heat retention during aqueous phase-change experiments.

Integrated Stirring and Probe Ports Equipped with a precision-molded lid containing a dedicated manual agitation portal and a standardized aperture for digital or glass thermometers, maintaining a sealed-system environment.

$15.23

Quick Answer: A simplified calorimeter is a basic insulated vessel for measuring heat transfer in school practicals, without the extra fittings of a full laboratory calorimeter. The simplified calorimeter is used mainly for the method of mixtures, in which a hot object is placed in cold water and the temperature change reveals its specific heat capacity.

The Method of Mixtures Step by Step

Weigh a metal sample, heat it in boiling water for several minutes so it reaches the water’s temperature, and weigh a known mass of cold water into the calorimeter. Record the starting temperature, transfer the sample quickly with as little hot water as possible, stir, and note the highest temperature reached. The heat lost by the sample equals the heat gained by the water and the vessel: m_s c_s (θ_hot − θ_final) = (m_w c_w + C_cal)(θ_final − θ_cold).

Solving for c_s gives the specific heat capacity of the metal. In a simple vessel the heat capacity C_cal is often small enough to leave out on a first attempt and then estimated in a follow-up, which shows students how much it changes the answer.

Where Heat Goes Missing

With less insulation, a simplified calorimeter loses heat faster than a specialist one, which usually makes measured specific heat capacities come out slightly low. Students can reduce the loss by starting the water a little below room temperature, so that it gains heat from the room for part of the experiment and loses it for the rest. Keeping the transfer quick and covering the vessel also helps.

A more formal fix is the cooling correction: take temperature readings every half-minute before and after adding the sample, plot them, and extend the cooling line back to the time of transfer. The extrapolated maximum is a better estimate of the temperature that would have been reached with no heat loss.

Class Practicals

  • Specific heat capacity of copper, aluminium or brass samples by the method of mixtures
  • Mixing hot and cold water to check that heat lost equals heat gained
  • Comparing the specific heat capacities of water and cooking oil
  • Introducing cooling corrections with a temperature-time graph

Specifications

Product Simplified calorimeter for basic heat experiments
Main method Method of mixtures
Typical measurements Specific heat capacity of metals and liquids, heat exchange between water samples
Also needed Thermometer, balance, heat source, stirrer
Vessel material, insulation and lid Confirm at enquiry

Care & Handling

  • Use tongs or a thread to transfer hot metal samples, never fingers
  • Empty and dry the vessel after each use to prevent water marks and corrosion
  • Stand the calorimeter on an insulating mat, away from the heat source used for the samples
  • Check that the thermometer bulb is fully immersed but not resting against the sample

Why Choose LabEquip

Schools buying calorimeters for a whole class often pick the simplified calorimeter because each group can run its own method-of-mixtures practical with little setting up. Where better insulation is needed, the Dewar flask calorimeter is the step up; contact LabEquip for class quantities, or browse more physics lab equipment.

Frequently Asked Questions

How does the method of mixtures work?

A hot sample is placed in a known mass of cold water, and the heat it loses equals the heat gained by the water and vessel. Measuring all the temperatures and masses lets the sample’s specific heat capacity be calculated.

Why do results often come out lower than book values?

Heat escapes to the surroundings while the mixture warms, and some is lost while the hot sample is transferred. Both make the final temperature too low, which lowers the calculated specific heat capacity.

How can heat loss be reduced without better equipment?

Start the water slightly below room temperature, transfer the sample quickly, keep the vessel covered and stir steadily. A cooling correction from a temperature-time graph helps further.

Should the heat capacity of the vessel be included?

For accurate work, yes. It can be measured by mixing known masses of hot and cold water in the vessel, and then added to the water’s heat capacity in the calculation.

Why must the sample be heated in boiling water for several minutes?

So that the whole sample, not just its surface, reaches the temperature of the boiling water. Its starting temperature can then be taken as that of the water.

Can the calorimeter be used for liquids other than water?

Yes, for example to compare the specific heat capacities of oil and water heated through the same temperature rise. Avoid liquids that attack the vessel material.

Last Updated: October 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
USD United States (US) dollar
Product has been added to your cart
Compare (0)