Quick Answer: The Digital Multimeter is a hand-held meter that measures voltage, current and resistance and shows the result as digits on a display. In school and college laboratories one such meter replaces a separate ammeter, voltmeter and ohmmeter for circuit practicals.
One Meter, Several Measurements
A rotary selector chooses the quantity and range, and the test leads go into the sockets marked for that measurement. For voltage the leads are placed across a component; for current the meter has to be inserted into the circuit so that the current flows through it; for resistance the component is tested with the circuit switched off, because the meter supplies its own small test current.
The digital display removes the parallax and scale-interpolation errors of a moving-coil meter, and on its voltage ranges a typical multimeter has a high input resistance, so it disturbs the circuit very little. Many models add continuity, diode and other tests, but the functions and ranges of this model are not stated in the listing title and should be compared with your practical list.
Choosing the right socket and range is part of the practical skill. Starting on the highest range and working down protects the meter, while leaving the red lead in the current socket and then measuring a voltage is the usual way students blow its internal fuse.
Uses in the Laboratory
- Reading current and potential difference in Ohm’s law work on the senior circuit board
- Checking the values of resistors and resistance boxes before a practical
- Testing connecting leads, fuses and switches for continuity
- Measuring the terminal voltage of cells and power supplies
- Following the alternating output of a small generator on an AC range
Care & Handling
- After use, turn the selector to OFF and return the red lead to the voltage socket.
- Never measure resistance on a live circuit.
- Replace the internal battery when the low-battery symbol appears, as readings become unreliable.
- Replace a blown fuse only with one of the same rating.
Specifications
| Type | Hand-held digital multimeter |
| Measures | Voltage, current and resistance |
| Display | Numeric digital readout |
| Controls | Rotary selector for function and range, with separate lead sockets |
| Functions, ranges and safety rating | Confirm at enquiry |
Why Choose LabEquip
Schools and colleges buy multimeters in class sets so that every group can take its own readings instead of queuing for a shared meter. LabEquip lists this meter in its Physics Equipments range; send quantities and any range requirements through the contact page.
Frequently Asked Questions
How do I measure current with a digital multimeter?
Switch off, break the circuit at the point of interest and connect the meter in series, using the current socket and a suitable current range. Switch on and read the display. Afterwards, move the red lead back to the voltage socket.
Why does my multimeter read zero for current?
The most common cause is a blown internal fuse, usually from connecting the meter across a supply while the leads were in the current socket. Check the fuse and replace it with one of the same rating.
Can the multimeter measure AC?
Most multimeters of this kind have AC voltage ranges and many have AC current ranges as well, but the functions of this model should be confirmed. AC readings are normally shown as RMS values for mains-type frequencies.
Why should resistance be measured with the circuit switched off?
The meter finds resistance by passing its own small current and measuring the voltage it produces. A live circuit adds its own voltage, gives a false reading and can damage the meter.
Is a digital multimeter more accurate than an analogue meter?
For most school measurements the digital display is easier to read and avoids parallax error. An analogue needle shows changing values more clearly, so it can still be useful for watching trends such as a capacitor charging.
Where should students start when the value is unknown?
Begin on the highest range for the chosen quantity, then switch down until the reading shows enough digits. This protects the meter from overload. Auto-ranging meters do this automatically, but the function must still be set correctly.
Last Updated: October 2026










Reviews
There are no reviews yet.