Quick Answer: Planck’s constant by photoelectric effect apparatus measures h by shining light of several known frequencies onto the cathode of a photocell and finding, for each one, the stopping voltage that just halts the emitted electrons. A straight-line graph of stopping voltage against frequency has a gradient equal to h/e.
Einstein’s Equation on the Bench
Each photon of light of frequency f carries energy hf. When it is absorbed at the cathode surface, part of that energy, the work function φ, frees an electron and the rest becomes the electron’s kinetic energy. The fastest electrons can be stopped by a reverse voltage V_s, so hf = φ + eV_s, which rearranges to V_s = (h/e)f − φ/e. Plotting V_s on the vertical axis against f gives a straight line of gradient h/e.
Light of known frequency is normally obtained by selecting single spectral lines from a mercury lamp with filters; the familiar lines lie at about 578 nm (yellow), 546 nm (green), 436 nm (blue) and 405 nm (violet), with frequency calculated from f = c/λ. Depending on the set-up, the stopping voltage is found either by raising a reverse voltage until the photocurrent just reaches zero, or by reading the voltage that the photocell builds up across a meter of very high resistance.
Working Out h From the Graph
Suppose the points give a gradient of 4.1 × 10⁻¹⁵ V s. Multiplying by e = 1.60 × 10⁻¹⁹ C gives h ≈ 6.6 × 10⁻³⁴ J s, close to the accepted 6.63 × 10⁻³⁴ J s. Where the line cuts the frequency axis is the threshold frequency f₀, below which no electrons leave the cathode however bright the light, and the work function equals hf₀.
A second run at the same frequency with the lamp moved further away, or with part of the beam blocked, makes the photocurrent fall while the stopping voltage stays the same. That single observation is the heart of the photon model: brightness sets how many electrons are emitted, frequency sets how much energy each one can carry.
Specifications
| Experiment | Planck’s constant, h, from the photoelectric effect |
| Governing equation | hf = φ + eV_s |
| Graph plotted | Stopping voltage V_s against frequency f; gradient = h/e |
| Detector in the usual arrangement | Vacuum photocell (phototube) |
| Also obtained | Threshold frequency and work function of the cathode |
| Light source, filters and meters supplied | Confirm at enquiry |
Applications
- Measuring Planck’s constant from the gradient of a V_s against f graph
- Showing that stopping voltage depends on frequency but not on light intensity
- Finding the threshold frequency and work function of the cathode surface
- Introducing the photon model of light in senior school and first-year university physics
Care & Handling
- Let the lamp reach steady brightness before taking readings, and after switching off allow it to cool before restarting.
- Handle filters by their edges and keep their faces free of fingerprints, which scatter light and blur the selected line.
- Cover the photocell window when it is not in use so room light does not reach the cathode.
- The lamp housing becomes hot; keep leads and paper away from it.
Why Choose LabEquip
Physics teachers and university laboratory managers buy this apparatus for the quantum-physics part of the syllabus, often in the same order as electron-beam experiments such as the specific charge of the electron set. LabEquip lists both under its physics lab equipment range. Ask through the contact page which lamp, filter set and measuring unit suit your practical.
Frequently Asked Questions
Why does the stopping voltage not change with light intensity?
Brighter light delivers more photons each second, so more electrons are released and the photocurrent rises. Each photon still carries energy hf, so the maximum kinetic energy of the electrons, and therefore the stopping voltage, depends only on the frequency.
How is Planck’s constant obtained from the graph?
The graph of stopping voltage against frequency is a straight line with gradient h/e. Multiplying the gradient by the electronic charge, 1.60 × 10⁻¹⁹ C, gives h in joule seconds.
Why are filters used with the lamp?
A mercury lamp gives out several spectral lines at once. Without a filter the stopping voltage would be set by the highest frequency present, so each reading must use light of a single line, isolated by its filter.
What is the threshold frequency?
It is the lowest frequency that can release electrons from the cathode, found where the graph cuts the frequency axis. Light below it causes no emission at any brightness, and the work function equals h multiplied by the threshold frequency.
Why can the work function come out wrong even when h is close?
The anode and cathode are made of different materials, and the contact potential between them shifts every stopping voltage by the same amount. That moves the line up or down without changing its slope, so h stays reliable while the intercept does not.
Is the mercury lamp safe to use in class?
A mercury lamp gives out ultraviolet as well as visible light, so it should always run inside its housing and nobody should look straight into it. The housing gets hot. If a lamp breaks, follow the local procedure for mercury spills and ventilate the room.
Last Updated: October 2026










Reviews
There are no reviews yet.