Quick Answer: The Resistance Box, Plastic is a resistance box housed in a plastic body that provides known resistance values students can bring into a circuit for school electricity practicals. A plastic resistance box does the same job as a traditional wooden one in Ohm’s law, bridge and meter-conversion experiments.
What the Plastic Body Changes
Resistance boxes were traditionally built in polished wooden cases with an insulating top. A plastic body performs the same two tasks of holding the resistance elements and insulating the terminals, and plastic cases generally cope better with damp, knocks and the spills common on a school bench. The case material affects handling and durability, not the electrical principle.
Inside, a set of fixed resistances is brought into circuit by the box’s selectors, and the value in circuit is read from the markings. Whether this box uses brass plugs or a switch layout, and which values it carries, is not stated in the listing title and should be confirmed. If it is a plug layout, the method described for the plug type resistance box applies.
For many school practicals, such as showing how the current falls as resistance rises at constant voltage, the box simply needs to provide a range of known values quickly and survive regular use by younger students.
Practicals
- Investigating how current depends on resistance at constant voltage
- Verifying Ohm’s law with a fixed resistance from the box
- Checking the rules for resistors in series and in parallel
- Providing the known resistance for a school metre bridge
Specifications
| Body | Plastic case (as titled) |
| Role | Known, stepped resistance for circuit practicals |
| Power | Passive component; no supply of its own |
| Users | School physics classes and practical groups |
| Selection method (plugs or switches) and values | Confirm at enquiry |
Care & Handling
- Keep the box away from burners, hot plates and soldering irons, since many plastics soften when hot.
- Keep currents small; the elements inside warm up as current flows.
- Clean with a cloth slightly dampened with water, never with solvents such as acetone.
- Keep liquids away from the terminals and store the box flat.
Why Choose LabEquip
Science departments buying class sets for younger students often prefer a plastic-bodied resistance box for its tolerance of everyday handling. LabEquip lists it in Physics Equipments; ask about the selection method and values through our contact page.
Frequently Asked Questions
Is a plastic resistance box as accurate as a wooden one?
Accuracy depends on the resistance elements inside, not on the case, which only houses and insulates them. If the box will be used for bridge measurements, compare its stated tolerance with the accuracy you need.
Why choose a plastic body for a school laboratory?
Plastic cases generally tolerate damp, spills and knocks better than polished wood, and they are easy to wipe clean. For class sets handled by younger students, that durability matters more than appearance.
Can the plastic box be used near heat?
Keep it away from burners, hot plates and soldering irons, because many plastics soften or distort when hot. Also keep currents small, since the resistance elements warm up as current passes through them.
How do I find the resistance in circuit?
Add the marked values of every element selected. With a plug layout, those are the gaps whose plugs are out; with a switch layout, the switch settings show the value. Check with a multimeter at the start of a lesson if unsure.
What practicals is it used for?
Mainly school electricity work: current and resistance at constant voltage, Ohm’s law, combining resistors, and providing a known resistance for a metre bridge or a galvanometer conversion.
How should the box be cleaned?
Wipe it with a cloth slightly dampened with water and dry it straight away. Avoid solvents such as acetone, which can attack plastics, and keep liquids away from the terminals.
Last Updated: October 2026










Reviews
There are no reviews yet.