Search

In Stock

Infrared Test Bench

Banc d'essai infrarouge, Interchangeable Multi-Finish Absorption Plates Supports the Evaluation of Kirchhoff’s Law of thermal radiation by comparing emission and absorption profiles across varied material surface finishes.

Precision Infrared Thermopile Sensor Enables the quantitative Application of Stefan-Boltzmann’s Law, allowing students to verify the fourth-power relationship between absolute temperature and total energy flux.

Integrated Heat Source Control Promotes the Synthesis of complex energy-balance models, ensuring students understand the variables affecting steady-state thermal equilibrium in industrial environments.

$124.31

Quick Answer: The infrared test bench is a linear bench on which an infrared source, a detector and test materials can be positioned at measured distances, used to study how infrared radiation spreads, is absorbed and passes through different materials. It supports practical work on the inverse square law and on the transmission of infrared by glass, plastics and other screens.

Radiation Experiments on a Bench

Infrared radiation behaves like light, travelling in straight lines and spreading out from its source, but it cannot be seen. A bench gives these experiments a fixed axis: the source, any screen or sample, and the detector sit in line, and their separations can be measured along the bench. This makes measurements repeatable from one group to the next.

The inverse square law is the natural first experiment on the infrared test bench. For a small source the intensity falls with the square of the distance, so doubling the separation should reduce the detector signal to about a quarter. Plotting the signal against one over distance squared gives a straight line where the law holds; departures close to the source show where its size can no longer be ignored.

Specifications

Item Bench for infrared radiation experiments
Experiments Inverse square law; transmission and absorption by screens
Measurement Detector reading against distance or material
Layout Source, sample and detector aligned along the bench at measurable distances
Source, detector and accessories included Confirm at enquiry

Transmission and Absorption Tests

Placing sheets of different materials between source and detector shows which pass infrared and which block it. Ordinary window glass absorbs much of the longer-wavelength infrared from warm objects while letting visible light through, the principle behind a greenhouse, and some plastics that look opaque pass infrared surprisingly well. Comparing the readings with and without each screen gives a transmission fraction for every material tested.

Practical Applications

  • Verifying the inverse square law for infrared radiation
  • Comparing infrared transmission of glass, plastics and other screens
  • Linking absorption by glass to the greenhouse effect
  • Comparing the response of different infrared detectors

Care & Handling

  • Allow the source to warm up and the detector to settle before taking readings
  • Keep hands and warm bodies out of the path between source and detector during measurements
  • Handle hot sources by their supports and let them cool before packing away
  • Store screens flat and clean, as fingerprints change their transmission

Why Choose LabEquip

University and senior school laboratories choose an infrared test bench when they want radiation measurements with controlled geometry rather than handheld comparisons. A thermopile detector is a common choice for such work, and the infrared bottles extend the topic to surface finishes; see more physics lab equipment and contact LabEquip for the bench components.

Frequently Asked Questions

Why does the inverse square law fail close to the source?

The law assumes a point source. When the detector is close, the source looks large and different parts of it are at different distances, so the reading no longer follows one over distance squared.

What kind of detector is used for infrared?

Thermopiles are common in teaching because they respond to a wide range of infrared wavelengths and give a voltage proportional to the radiation absorbed. Photodiodes and pyroelectric sensors are used where a faster response or a narrower band is needed.

Why does glass block infrared from a warm object but not sunlight?

Glass transmits visible light and near infrared well but absorbs the longer infrared wavelengths emitted by objects near room temperature. Sunlight is mostly visible and near infrared, so much of it passes through.

How can stray radiation be reduced?

Take a background reading with the source covered, keep warm hands and bodies out of the path, and shield the detector from lamps and windows. Subtracting the background from each reading improves accuracy.

Can the bench be used to compare surface emissivity?

Yes, if a source with differently finished surfaces at the same temperature, such as a cube with painted and polished faces, is placed on the bench. Comparing the detector readings gives the relative emissivity of each finish.

Why should the detector be allowed to settle?

Thermal detectors respond to the warming of their own receiving surface, which takes time. Reading too early catches the detector part way through its response and gives values that are too low.

Last Updated: October 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
USD United States (US) dollar
Product has been added to your cart
Compare (0)