Quick Answer: Infrared bottles are a set of matching bottles with different outer surface finishes, used to compare how surfaces absorb and emit infrared radiation. Filled with water and placed under an infrared lamp, or filled with hot water and left to cool, they show that surface colour and texture change the rate of heat transfer by radiation.
Kirchhoff’s Rule on the Bench
Every surface both absorbs and emits infrared radiation, and in the nineteenth century Gustav Kirchhoff showed that, at a given wavelength and temperature, a surface that is a good absorber is an equally good emitter. Matt dark finishes do both well; polished metallic finishes do both poorly and reflect most of the radiation that falls on them.
Infrared bottles let students test this in two halves. In the absorption run, bottles holding equal amounts of water at room temperature are placed at equal distances from an infrared lamp and their temperatures recorded over time. In the emission run, the bottles are filled with equal amounts of hot water and left to cool in still air. The ranking of the bottles should be the same in both runs, which is the point of the experiment.
Experiments
- Comparing absorption of infrared by dark and shiny surfaces
- Comparing emission by the same surfaces during cooling
- Testing Kirchhoff’s rule that good absorbers are good emitters
- Discussing building colours, solar heaters and survival blankets
Making the Comparison Fair
Radiation is not the only way the bottles exchange heat: convection and conduction to the air and the bench act on all of them. Keeping these the same, with equal volumes, equal starting temperatures, identical closures and thermometer positions and no draughts, means the differences that remain come from the surfaces. Plotting temperature against time for each bottle on one graph shows the effect clearly.
Specifications
| Item | Set of bottles with different outer finishes for radiation studies |
| Principle | Absorption and emission of infrared radiation depend on the surface |
| Experiments | Warming under an infrared source; cooling of hot water |
| Measurement | Thermometers or temperature sensors in each bottle |
| Number of bottles, finishes and capacity | Confirm at enquiry |
Care & Handling
- Avoid scratching or touching the coated or polished surfaces, which changes how they radiate
- Keep the infrared lamp at a safe distance and do not leave it unattended
- Handle bottles of hot water with a cloth or heat-resistant gloves
- Rinse and dry the bottles after use to prevent water marks on the finishes
Why Choose LabEquip
Schools choose infrared bottles because one set covers both halves of the radiation story, absorption and emission, with the same surfaces. Pair them with the infrared heating bulb 75 W as a steady source and the infrared test bench for further work; more physics lab equipment is in the category, and LabEquip can confirm the finishes in the current set.
Frequently Asked Questions
Why does the dark bottle warm fastest under the lamp?
A matt dark surface absorbs most of the infrared falling on it, while a shiny surface reflects most of it away. The dark bottle therefore takes in energy faster and its water warms more quickly.
Which bottle loses heat fastest when filled with hot water?
The bottle with the matt dark finish usually cools fastest, because a good absorber of infrared is also a good emitter. The shiny bottle cools slowest, as it radiates least.
Why must all bottles be the same distance from the lamp?
The intensity of radiation falls with distance from the lamp, so a closer bottle would receive more energy regardless of its finish. Equal distances make sure the surfaces are the only difference.
Does a white surface behave like a shiny one?
Not quite. In the infrared, many white paints absorb and emit fairly well even though they reflect visible light, while polished metal reflects infrared strongly. Results therefore depend on the actual finish rather than on how bright it looks.
How long should each run last?
Long enough for clear temperature differences to develop, usually a matter of minutes rather than seconds. Readings at regular intervals, plotted on one graph, are more informative than a single reading at the end.
Where is this effect used in practice?
Solar water heaters use matt black absorbers, survival blankets use shiny surfaces to reduce heat loss, and roofs in hot climates are often light-coloured to reduce heat gain from sunlight.
Last Updated: October 2026










Reviews
There are no reviews yet.