Quick Answer: The Post Office Box-Plug Type (Constantan & Manganin Coil) is a compact Wheatstone bridge built into one box, with ratio arms and an adjustable arm made of resistance coils selected by brass plugs, plus tap keys for the cell and galvanometer. The box measures an unknown resistance by balancing the bridge.
A Wheatstone Bridge in a Box
The name comes from the boxes once used by telegraph engineers to test lines and locate faults. The box contains three arms of a Wheatstone bridge: two ratio arms, P and Q, and a third arm R that is adjusted until balance. The unknown resistance S is connected externally to complete the bridge, and two tap keys close the battery circuit and the galvanometer circuit.
At balance S = R x Q/P. Setting Q/P to a small fraction lets R be found to a finer step, so the usual method is to locate the value roughly with equal ratio arms and then change the ratio to refine it. The cell key is always pressed before the galvanometer key, so that the current has settled before the galvanometer is connected and the momentary surge from self-induction does not kick the pointer.
Coils of constantan or manganin are used because both alloys change resistance very little with temperature, which keeps the arms steady through a practical. Like the meter bridge, the box measures resistance by balancing; it covers a wider range in less space, though its layout is less visual for beginners. The ratio values, the maximum of the R arm and the alloy supplied should be confirmed for this listing.
Practicals
- Measuring an unknown resistance by Wheatstone’s principle
- Finding the resistivity of the material of a wire
- Checking the laws of combination of resistances
- Measuring how the resistance of a coil changes with temperature
Care & Handling
- Insert plugs with a slight twist so they seat firmly, and keep their tapered surfaces clean and dry.
- Press the cell key before the galvanometer key, and release them in reverse order.
- Store the box with every plug in place to protect the sockets from dust.
- Keep currents small and brief; the coils are measuring resistances, not heaters.
Specifications
| Type | Post office box (compact Wheatstone bridge) |
| Arms | Two ratio arms and one adjustable arm |
| Selection | Brass plugs removed to bring coils into circuit |
| Keys | Tap keys for the cell and galvanometer circuits |
| Coil alloy | Constantan or manganin (as titled) |
| Ratio and arm values | Confirm at enquiry |
Why Choose LabEquip
Colleges and senior schools buy this compact bridge for the practical on measuring resistance and resistivity by bridge balance, often alongside metre bridges. LabEquip lists this plug-type box in Physics Equipments; confirm the coil alloy and ratio values via the contact page.
Frequently Asked Questions
Why is it called a post office box?
Boxes of this design were used by telegraph engineers of the post office to measure line resistance and find faults. The name stayed with the compact plug-type Wheatstone bridge used in physics laboratories.
Which key should be pressed first?
Press the cell key first, then the galvanometer key. When the current starts, self-induction in the coils briefly upsets the balance; connecting the galvanometer after the current has settled avoids a false kick.
How do the plugs change the resistance?
Each coil is connected across a gap between two brass blocks. With the plug in, current bypasses the coil through the plug. Removing the plug forces current through the coil, adding its resistance to that arm.
Why are constantan and manganin used for the coils?
Both alloys combine a high resistivity with a very small temperature coefficient of resistance, so the coil values change little as they warm. That keeps the bridge balance steady during measurement.
How do I get a more precise result?
First find the balance with equal ratio arms to locate the value roughly. Then make Q smaller than P by a factor of ten or a hundred, rebalance, and multiply R by Q/P. The unknown is then found to a finer step.
How is the post office box different from a meter bridge?
Both rely on the Wheatstone balance. The meter bridge uses a slide wire for two arms and suits mid-range resistances; the post office box uses fixed coils and plugs, is more compact, and covers a wider range when the ratio arms are changed.
Last Updated: October 2026










Reviews
There are no reviews yet.