Quick Answer: The centimetric waves kit with accessories is a microwave transmitter and receiver set supplied with additional parts for wave-optics experiments. The accessories extend the kit from simple reflection towards experiments such as diffraction, two-source interference and refraction, all with waves a few centimetres long.
Diffraction and Two-Slit Interference
A slit whose width is comparable with the wavelength spreads the microwave beam noticeably, and moving the receiver in an arc around the slit maps the diffraction pattern with its central maximum and weaker side lobes. With two slits, waves from each overlap and produce maxima where the path difference is a whole number of wavelengths. Measuring the angle to the first maximum and the slit separation d gives the wavelength from d sin θ = λ.
Because the slit spacing here is several centimetres, students can see why interference fringes from light need slits a fraction of a millimetre apart: the geometry is identical, only scaled.
Refraction, Interferometers and Crystal Models
Kits of this kind commonly include a prism or lens made of wax or plastic, which bends the microwave beam just as glass bends light, and a partial reflector that splits the beam for a Michelson-style interferometer. Moving one reflector and counting the maxima at the receiver gives the wavelength by a different principle from standing waves.
Some accessory sets also contain a cubic lattice of small metal spheres held in a foam block, a scaled model of a crystal. Rotating it in the beam shows strong reflection at particular angles, the microwave version of the Bragg diffraction used with X-rays. Which of these parts this kit contains should be confirmed from its parts list before planning a scheme of work.
Extended Experiments
- Single-slit diffraction patterns mapped by moving the receiver
- Two-slit interference and calculation of the wavelength
- Refraction of microwaves by a prism or lens
- Bragg reflection on a lattice model, where included, as an analogue of X-ray crystallography
Specifications
| Product | Centimetric (microwave) waves kit with accessories |
| Main units | Transmitter and receiver |
| Extended experiments | Diffraction, two-slit interference, refraction and interferometry |
| Key relations | d sin θ = mλ for slits; 2d sin θ = nλ for a lattice model |
| Accessory list, frequency and supply | Confirm at enquiry |
Care & Handling
- Keep accessory plates, slits and lattice parts in their tray so they are not bent or lost
- Avoid aiming the transmitter at anyone’s eyes at short range and switch it off when rearranging parts
- Keep the units and accessories dry, as moisture absorbs microwaves and affects readings
- Check that transmitter and receiver are at the same height before each experiment
Why Choose LabEquip
Colleges and schools wanting a full microwave optics course from one kit tend to choose the version with accessories, so that diffraction, interference and refraction follow on from the basic experiments. For core experiments only, the centimeter wave kit may be enough; contact LabEquip to compare the two parts lists.
Frequently Asked Questions
What can the accessories add to a basic microwave kit?
They extend the experiments beyond reflection and standing waves to diffraction, two-source interference, refraction and interferometry. The exact accessory list should be checked against the parts list for this kit.
How is the two-slit experiment done with microwaves?
Place a metal plate with two slits in the beam and move the receiver around an arc behind it. Maxima appear where the path difference is a whole number of wavelengths, so the angle to the first maximum and the slit spacing give the wavelength.
Why does a wax or plastic prism bend microwaves?
Microwaves travel more slowly in the prism material than in air, just as light does in glass. The change in speed at each surface changes the direction of the beam.
What is the lattice model used for?
It is a scaled model of a crystal. Microwaves reflect strongly from its planes only at angles that satisfy the Bragg condition, which mirrors how X-rays reveal the structure of real crystals.
How does this kit differ from the basic centimeter wave kit?
Both rely on a transmitter and receiver. This version adds accessories for a wider range of experiments, making it suitable for a full course in wave optics rather than a few core practicals.
Do both horns need to be aligned carefully?
Yes. The transmitter and receiver should share the same height and polarisation direction, otherwise readings drop for reasons that have nothing to do with the experiment.
Last Updated: October 2026










Reviews
There are no reviews yet.