Quick Answer: The Resistance Box, Electronic Type is a resistance box that switches fixed electronic resistors into a circuit, instead of using wire-wound coils and brass plugs, to provide known resistance values. Physics students use an electronic type resistance box as a known or variable resistance in circuit, meter and bridge practicals.
Electronic Resistors Instead of Wound Coils
A traditional resistance box carries hand-wound coils of alloy wire under brass blocks and is set by pulling plugs. In an electronic type box the resistance elements are ready-made resistors of the kind found on circuit boards, and they are brought into circuit by switches. There are no loose plugs to seat, lose or clean, and changing the value is a matter of moving a switch.
Each switch position adds a fixed resistor, and the resistance in circuit is read from the switch settings and the values printed on the panel. For students the job of the box is the same as any resistance box: it provides a known resistance that can be changed in steps, whether as the comparison arm of a bridge, a load across a cell or a series resistor in a meter conversion.
Electronic resistors are specified by a tolerance and a power rating. Where a resistance standard is wanted for careful bridge work, the wound alloy coils of a plug type resistance box remain the traditional choice. The listing title does not give the switch layout, values, tolerance or power rating of this box.
Specifications
| Type | Resistance box, electronic type |
| Resistance elements | Fixed electronic resistors rather than wound coils |
| Selection | Switches; value read from the switch settings |
| Typical uses | Load resistance, bridge arm, series or shunt resistor |
| Switch layout, values, tolerance and power rating | Confirm at enquiry |
Where It Is Used
- Providing a variable load when measuring the internal resistance of a cell with a voltmeter and ammeter
- Showing how current changes with resistance at constant voltage
- Known arm of a metre bridge in school practicals
- Setting the current through an LED or the base resistor of a transistor in electronics work
Care & Handling
- Keep the current within the box’s power rating; small electronic resistors overheat quickly.
- Change switch settings with the circuit switched off.
- Keep the box dry and away from hot plates and burners.
- Check a few values with a multimeter at the start of each term.
Why Choose LabEquip
Schools that want resistance boxes without loose plugs choose the electronic type for class sets. LabEquip lists it alongside the decade resistance box in Physics Equipments; confirm the switch layout and values through our contact page.
Frequently Asked Questions
What is the difference between an electronic type and a plug type resistance box?
A plug type box uses wound alloy coils selected by pulling brass plugs. An electronic type uses ready-made resistors selected with switches, so there are no plugs to seat or lose. The plug type remains the traditional reference for bridge work.
How is the resistance value read?
Add the values of the resistors selected by the switch settings, as marked on the panel. On a decade-style layout the setting reads directly as a number; on a bank of switches, each switch that is on adds its marked value.
Can I use the box to control the current in a circuit?
Only for small currents. Each resistor has a power rating, and exceeding it overheats the resistor and changes its value. For larger, smoothly varied currents use a rheostat.
Is the electronic type suitable for metre bridge experiments?
Yes, as the known resistance, provided its tolerance suits the accuracy wanted. For the most careful bridge work, wound manganin or constantan coils are still preferred.
Why switch off before changing the setting?
Moving switches while current flows can briefly open the circuit or connect an unintended value, causing sparks at the contacts and surges in meters. Switching off protects both the box and the instruments.
Does the box need a battery or power supply of its own?
No. A resistance box is a passive component that only adds known resistance to the circuit it is connected into. In this name, electronic normally describes the type of resistors inside, not any powered circuitry.
Last Updated: October 2026










Reviews
There are no reviews yet.