Search

In Stock

Blocks Acrylic, Semi-circular

Optical-Grade Polymethyl Methacrylate (PMMA): Cast from high-purity acrylic with a standardized refractive index (n  1.49), featuring diamond-polished faces to minimize beam scattering and internal diffraction.

Zero-Distortion Geometric Profile: Features a perfectly orthogonal flat face and a consistent radius curvature, ensuring precise ray entry/exit points for the accurate measurement of incident and refracted angles.

$3.05

Quick Answer: The Blocks Acrylic, Semi-circular is a transparent acrylic block shaped as a half disc, with one flat face and one curved face, used to study refraction, the critical angle and total internal reflection. Any ray aimed through the curved face of the semi-circular acrylic block towards the centre of its flat face crosses the curve without bending.

Why the Half-disc Shape Helps

Every line from the centre of the flat face to the curved face of the block is a radius. A ray that enters through the curve heading for that centre therefore meets the curved surface along the normal and passes straight through. All the refraction happens at one surface, the flat face, which makes the angles inside and outside the acrylic easy to measure with a protractor.

With light entering the flat face at its centre, the block shows refraction from air into acrylic. Turned so that light travels from acrylic towards air at the flat face, it shows the reverse: the ray bends away from the normal, and as the angle inside the block increases the refracted ray swings down until it grazes the surface, then disappears as all the light is reflected back inside. The angle at which this happens is the critical angle, C, and the refractive index follows from n = 1/sin C.

Students can watch the transition: as the angle grows, the reflected ray inside the acrylic brightens while the refracted ray dims, until only reflection remains. This is the principle behind optical fibres and the prisms in binoculars. A laser optics experiment tank kit shows the same effect in water.

Measuring the Critical Angle

Place the semi-circular acrylic block on paper with its flat face along a drawn line and mark the centre of that face. Direct a single ray from a ray box through the curved face towards the centre, then rotate the block slowly until the emerging ray just skims along the flat face. Mark the ray, measure its angle from the normal and repeat on the other side of the normal; the average is the critical angle. For acrylic, with a refractive index of about 1.5, it comes out at roughly 42 degrees.

Investigations

  • Measuring the critical angle and calculating the refractive index of acrylic
  • Demonstrating total internal reflection, the principle of optical fibres
  • Verifying Snell’s law for light passing from air into acrylic and back
  • Comparing partial reflection and refraction as the angle of incidence rises

Specifications

Material Acrylic (PMMA), transparent
Shape Half disc: one flat face, one curved face
Key property Rays through the centre cross the curved face undeviated
Used with Ray box, protractor and paper
Radius and thickness Confirm at enquiry

Care & Handling

  • Protect the curved face from scratches; a scratched curve scatters the ray and blurs the critical-angle position.
  • Wash only with water and mild soap, then dry with a microfibre cloth.
  • Keep the block out of sunlight and away from ray-box housings that run hot.
  • Store each block in its own sleeve or a divided tray.

Why Choose LabEquip

Physics teachers who want students to measure the critical angle rather than read about it buy semi-circular blocks alongside rectangular ones. LabEquip lists both in Physics Equipments, including the rectangular acrylic block, and the contact page can arrange class sets.

Frequently Asked Questions

Why is the ray not bent at the curved face?

A ray aimed at the centre of the flat face travels along a radius, and a radius meets a circle at right angles. Light crossing a boundary along the normal is not deviated, so refraction happens only at the flat face.

What is the critical angle?

It is the angle of incidence inside the denser medium for which the refracted ray travels along the boundary, at 90 degrees to the normal. Beyond it, light cannot leave and is totally internally reflected.

How is refractive index found from the critical angle?

Use n = 1/sin C. For example, a measured critical angle of 42 degrees gives a refractive index of about 1.49, typical for acrylic.

Should the light enter through the flat face or the curved face?

For the critical angle, enter through the curved face aimed at the centre, so the ray meets the flat face from inside the acrylic. For refraction from air into acrylic, enter through the flat face at its centre.

Why does the refracted ray look coloured near the critical angle?

Acrylic refracts violet light slightly more than red, so near the critical angle the colours separate and the shortest wavelengths are totally reflected first. This is dispersion, the effect that splits white light in a prism.

Can a laser pointer be used instead of a ray box?

A low-power laser gives a very sharp beam and works well, but it must never be pointed at anyone’s eyes or viewed after reflection from shiny surfaces. A ray box with a single narrow slit is the safer choice for class use.

Last Updated: October 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
USD United States (US) dollar
Product has been added to your cart
Compare (0)