Quick Answer: The Blocks Acrylic, Rectangular is a clear acrylic (PMMA) block with parallel faces, used in physics practicals to trace light rays through a parallel-sided transparent slab. With a rectangular acrylic block students measure angles of incidence and refraction, find the refractive index and observe lateral displacement.
Refraction Through Parallel Faces
A ray entering one long face of the block bends towards the normal, travels straight through the acrylic, and bends away from the normal as it leaves the opposite face. Because the two faces are parallel, the emerging ray is parallel to the incident ray but shifted sideways. This lateral displacement grows with the angle of incidence and with the thickness of the block.
Snell’s law, n = sin i / sin r, links the angles at the first face. Plotting sin i against sin r for five or six rays gives a straight line through the origin whose gradient is the refractive index; for acrylic this is generally close to 1.5, similar to ordinary glass. Acrylic is lighter than a glass slab and far less likely to chip or shatter when dropped, though its surface scratches more easily.
A second method uses real and apparent depth. Viewed from above through the block, a mark beneath it appears raised. Locating that image with a travelling pin by no parallax and dividing the real thickness by the apparent depth gives another value of n, which students can compare with the ray-tracing result.
Tracing Rays with Pins
Place the rectangular acrylic block on paper over a soft board and draw round it. Draw a normal and an incident line at a measured angle, push two pins upright along that line, then look through the opposite face and place two more pins in line with the images of the first two. Remove the block, join the points and draw the ray inside it. Where the room can be darkened, a single-slit ray box such as the one in the compact ray optics box replaces the pins.
Specifications
| Material | Acrylic (PMMA), transparent |
| Shape | Rectangular block with parallel faces |
| Refractive index of acrylic (typical) | About 1.5 |
| Use with | Pins and a drawing board, or a ray box |
| Block dimensions and edge finish | Confirm at enquiry |
Practicals
- Verifying Snell’s law and finding the refractive index of acrylic
- Measuring lateral displacement for different angles of incidence
- Finding refractive index by the real and apparent depth method
- Observing partial reflection at the faces alongside refraction
Care & Handling
- Clean with water and a drop of mild detergent; alcohol and solvents can craze acrylic.
- Wipe dry with a soft cloth, as paper towels leave fine scratches that scatter light.
- Store blocks in a padded box rather than loose against glassware or metal.
- Keep blocks away from heaters and sunny window sills, where acrylic can warp.
Why Choose LabEquip
Schools buy rectangular acrylic blocks in class sets for refraction practicals because they survive being dropped by students far better than glass slabs. LabEquip offers them with the semi-circular acrylic block in Physics Equipments, and quantities for a practical class can be requested through the contact page.
Frequently Asked Questions
Why is the emerging ray parallel to the incident ray?
The two faces are parallel, so the bending at the exit face exactly reverses the bending at the entry face. The ray leaves in its original direction, only shifted sideways by the lateral displacement.
Is acrylic as good as glass for refraction practicals?
For school measurements, yes. Acrylic has a refractive index close to that of ordinary glass, gives sharp images when clean and is far safer to handle. Its surfaces scratch more easily, so careful cleaning matters.
How do I find the refractive index from my results?
Measure the angle of incidence and the angle of refraction for several rays, calculate sin i and sin r, and plot sin i against sin r. The gradient of the straight line is the refractive index.
What makes the lateral displacement larger or smaller?
The shift increases with the angle of incidence and with the thickness of the block. At normal incidence there is no shift at all, because the ray passes straight through.
Can the rectangular block show total internal reflection?
Light that enters one face and leaves through the parallel opposite face never exceeds the critical angle, so it is not totally reflected on that path. Light entering through an end face can be, but a semi-circular block shows the effect far more clearly and lets the critical angle be measured.
How should acrylic blocks be cleaned?
Rinse with water and a drop of mild detergent, then pat dry with a soft cloth. Avoid alcohol, acetone and solvent-based glass cleaners, which can craze acrylic with a network of fine cracks.
Last Updated: October 2026










Reviews
There are no reviews yet.