Quick Answer: The Serology water bath is a compact laboratory water bath, pictured with a transparent tank, a perforated tube-holder plate across the top and a control box with a rotary knob, used to hold serum and reagent tubes at a steady temperature during serological tests.
Built Around the Tube
Serology tests work with small volumes of serum in tubes, and this bath is designed around that. Instead of a deep tank with racks standing on the floor, the pictured baths have a perforated plate across the top of a shallow, clear tank: tubes drop straight into the holes and hang in the water with their caps above the plate. Labels and liquid levels can be read through the transparent walls without lifting anything out.
Two temperatures come up again and again in serology. Incubation at 37 °C, body temperature, is used for antigen and antibody reactions such as agglutination tests. Heating serum at 56 °C for about 30 minutes inactivates complement, a group of serum proteins that would otherwise interfere with some tests. A small serology water bath kept at one of these settings saves retuning a large general bath between jobs.
The photo shows two sizes side by side, the longer one with a clear, ridged cover; the control box at one end of each carries a rotary knob and an indicator lamp. Capacities and the temperature range are not given in the title, so the size should be matched to the number of tubes per run. For bigger loads or mixed vessels, a general-purpose bath such as the Pura water bath is the alternative.
Serology and Related Uses
- Incubating agglutination and precipitation tests at 37 °C
- Heat-inactivating serum at 56 °C before complement-dependent tests
- Bringing reagents and controls to the test temperature before use
- Immunology and microbiology practicals where students watch tubes through the tank wall
Care & Handling
- Use distilled water and keep it above the minimum level, so the heater is always covered.
- Stand a thermometer in the water and compare its reading with the setting before any timed step.
- Handle serum and other blood-derived samples as potentially infectious: wear gloves, keep tubes capped and disinfect spills on the plate.
- Empty and dry the tank regularly, wiping the clear walls with mild detergent rather than a scouring pad.
Specifications
| Type | Compact water bath for serology tubes |
| Tank | Transparent, as pictured |
| Tube holding | Perforated plate across the top of the tank |
| Controls | Rotary knob and indicator lamp on an end control box, as pictured |
| Versions pictured | Two lengths, the longer one with a clear cover |
| Capacity and temperature range | Confirm at enquiry |
Why Choose LabEquip
Serology, immunology and microbiology teaching labs buy a small dedicated bath so serum work does not compete with other jobs for the main water bath. LabEquip lists it in General Lab Products; tell us how many tubes you run at a time through the contact page.
Frequently Asked Questions
Why is a separate bath used for serology?
Serology steps run at fixed temperatures, mostly 37 °C or 56 °C, and are timed. A small bath kept at one setting is ready when needed and is not disturbed by other users opening it or changing the temperature.
What is heat inactivation of serum?
Holding serum at 56 °C for about 30 minutes destroys complement, a set of heat-sensitive serum proteins. It is done before tests in which complement activity would affect the result.
How are the tubes held in the bath?
They sit in the holes of the perforated plate across the top, so each tube hangs in the water with its cap and label above the plate. The water should reach the level of the serum inside the tubes.
Why is the tank transparent?
Clear walls let you check the water level, tube contents and any visible reaction without lifting tubes out. A whole group of students can also watch the tubes at once.
How do I confirm the bath is at the right temperature?
Place a calibrated thermometer in the water near the tubes and wait until the reading is steady before starting a timed step. Turn the control knob in small steps and give the water time to settle after each change.
Is it safe to work with serum in an open bath?
Keep tubes capped, wear gloves and wipe spills from the plate with a suitable disinfectant. Serum and other blood-derived samples should always be treated as potentially infectious.
Last Updated: October 2026










Reviews
There are no reviews yet.