Clamping system Pt 1000

The StemAids Clamping System Pt 1000 is a laboratory support accessory designed to securely hold a Pt1000 temperature sensor during heating, stirring and temperature-controlled laboratory procedures. It is suitable for use with compatible hotplate magnetic stirrers, heating magnetic stirrers, heating blocks, reaction vessels and laboratory temperature monitoring setups.

This clamping system helps position the Pt1000 probe safely inside a beaker, flask or reaction vessel without disturbing the magnetic stir bar, glassware or sample movement. By holding the temperature sensor in a stable position, it supports more consistent and reliable temperature readings during laboratory heating applications.

Supplied under the StemAids brand, this accessory is useful for chemistry laboratories, biology laboratories, pharmaceutical labs, research centres, quality control departments, educational institutions and industrial testing laboratories where accurate temperature monitoring is required.

Important Note: The Clamping System Pt 1000 is an accessory only. It does not include heating, stirring or temperature sensing by itself unless supplied as a complete set with a Pt1000 probe. Confirm compatibility with the final magnetic stirrer, Pt1000 sensor diameter and laboratory stand arrangement before purchase.

Key Features

• Designed to hold Pt1000 temperature sensors securely during laboratory heating
• Suitable for compatible hotplate magnetic stirrers and heating magnetic stirrers
• Helps maintain stable probe positioning for accurate temperature monitoring
• Useful for beakers, flasks, heating blocks and reaction vessels
• Support rod and clamp-style arrangement depending on supplied model
• May include cable inlet or cable guide for organized sensor cable placement
• Reduces manual handling of temperature probes during heating
• Useful for reflux, sample heating, reagent preparation and QC procedures
• Suitable for educational, research, pharmaceutical and analytical laboratories
• StemAids brand support for institutional laboratory procurement

Product Specifications

Detailed Product Description

The StemAids Clamping System Pt 1000 is designed to improve safety, stability and accuracy during temperature-controlled laboratory work. When a Pt1000 temperature probe is placed manually into a heated sample, movement, incorrect depth or contact with the vessel wall can affect temperature readings. A proper clamping system helps keep the probe in the correct position throughout the process.

This accessory is especially useful when using a hotplate magnetic stirrer with external temperature control. The clamp holds the Pt1000 probe at a fixed depth inside the sample, allowing the controller to read temperature more consistently. It also helps prevent the probe from touching the rotating magnetic stir bar, which can cause noise, damage or inaccurate readings.

The clamping system can be used with beakers, flasks and selected reaction vessels, depending on the stand and clamp arrangement. It is suitable for solution heating, buffer preparation, reflux setups, temperature-controlled sample processing, pharmaceutical testing and educational laboratory demonstrations.

For best performance, the Pt1000 probe should be positioned in the liquid sample without touching the glass wall, vessel bottom or magnetic stir bar. The clamp should be tightened securely but not over-tightened, especially when holding glass-coated or delicate temperature probes.

Applications

• Holding Pt1000 temperature sensors during heating
• Temperature-controlled magnetic stirring
• Hotplate magnetic stirrer applications
• Heating block and flask heating setups
• Reagent preparation and solution warming
• Buffer preparation and sample conditioning
• Reflux and reaction temperature monitoring
• Quality control laboratory testing
• Pharmaceutical and research laboratory workflows
• Educational chemistry and biology practicals

How to Use StemAids Clamping System Pt 1000

1. Check compatibility: Confirm that the clamping system is suitable for your Pt1000 probe, hotplate magnetic stirrer and laboratory stand arrangement.
2. Place the stirrer safely: Keep the magnetic stirrer or heating device on a flat, dry and heat-resistant laboratory bench.
3. Install the support rod: Attach the support rod to the stirrer body, stand base or suitable laboratory support system as per the manual.
4. Attach the clamp: Fix the probe clamp or holder to the support rod at the required height.
5. Insert the Pt1000 probe: Place the Pt1000 sensor into the clamp carefully and secure it gently.
6. Position the probe: Lower the probe into the liquid sample at the correct immersion depth.
7. Avoid contact: Ensure the probe does not touch the vessel wall, vessel base or rotating magnetic stir bar.
8. Manage the cable: Route the sensor cable through the cable inlet or guide if provided.
9. Start stirring and heating: Begin stirring at low speed, then set the required heating temperature on the compatible controller.
10. Monitor operation: Check that the probe remains stable and the cable is away from hot surfaces.
11. Remove after cooling: After use, switch off heating, allow the setup to cool and remove the probe carefully.
12. Clean and store: Wipe the clamp and rod after use and store the accessory in a clean, dry place.

Safety Instructions

• Do not use the clamping system with incompatible probe diameters.
• Do not over-tighten the clamp on delicate glass or coated Pt1000 probes.
• Keep the probe cable away from hotplates, flames and heated vessels.
• Do not allow the Pt1000 probe to touch the magnetic stir bar.
• Do not allow the probe tip to rest directly on the vessel bottom.
• Ensure the support rod and clamp are firmly fixed before heating begins.
• Use heat-resistant gloves when adjusting accessories near hot vessels.
• Do not adjust the clamp carelessly while the sample is boiling or splashing.
• Use laboratory PPE such as gloves, goggles and lab coat.
• Allow all heated parts to cool before dismantling the setup.

Why Choose StemAids Clamping System Pt 1000?

SEO Keywords

Clamping system Pt 1000, StemAids Pt1000 clamp, Pt1000 temperature sensor clamp, Pt1000 probe holder, magnetic stirrer Pt1000 clamp, hotplate magnetic stirrer accessory, temperature probe clamp, laboratory sensor holder, Pt1000 support rod, Pt1000 attachment with cable inlet, heating magnetic stirrer accessory, laboratory temperature monitoring clamp, chemistry lab accessories, pharmaceutical lab temperature probe holder, QC laboratory accessories.

SEO Meta Title

StemAids Clamping System Pt 1000 | Temperature Sensor Probe Holder

SEO Meta Description

StemAids Clamping System Pt 1000 is a laboratory accessory for securely holding Pt1000 temperature sensors during hotplate magnetic stirrer, heating block, flask heating and controlled temperature applications.

Google E-E-A-T Focused Content

This product description follows Google E-E-A-T content principles by providing clear product purpose, practical usage guidance, transparent specification notes and safety instructions. The product is correctly described as a Pt1000 clamping accessory, not as a temperature sensor, heater or magnetic stirrer.

The StemAids Clamping System Pt 1000 is described for science teachers, laboratory technicians, QC analysts, researchers, pharmaceutical laboratories and procurement officers who need accurate information before purchase. The content focuses on real laboratory applications such as stable probe positioning, temperature monitoring, hotplate stirrer use, heating block setups and safe laboratory handling.

Frequently Asked Questions