Quick Answer: The Burette Clamp Single, Fisher Type, Superior is a Fisher type burette clamp for one burette: it fixes straight onto a retort stand rod with its own thumbscrew and grips the burette between coated jaws. The listing image shows a blue body with red coated jaws.
What Sets a Fisher Type Burette Clamp Apart
Burette clamps come in two broad families. Some are ordinary clamps on a rod, which need a boss head before they can be attached to the stand. A Fisher type clamp carries its own fixing: the body fits over the stand rod and a thumbscrew locks it at the chosen height. With one part instead of two, it is quicker to set up and there is one less screw to work loose during a practical.
The red jaws in the photograph are coated, which gives grip on smooth glass and keeps metal off the barrel. Many clamps of this family close their jaws with a spring, so a burette can be clipped in and out with one hand. ‘Superior’ is part of the listed name; the title gives no further detail of material or jaw size.
Because it holds a single burette, this clamp suits individual titration stations, and it can be set at exactly the height that puts the burette tip just inside the neck of the conical flask. For two burettes on one stand, see the die-cast double burette clamp.
Care & Handling
- Set the Fisher type burette clamp so the tap is at comfortable hand height with the tip inside the flask neck.
- Lower the clamp before filling rather than filling a burette above head height.
- Wipe permanganate and iodine stains from the jaws after use, before they discolour the coating.
- If the thumbscrew no longer bites on the rod, clean grease off the rod and check the thread before tightening harder.
Specifications
| Holds | One burette |
| Type | Fisher type, fixing directly to the stand rod |
| Jaws | Coated, red in the listing image |
| Fixing | Thumbscrew onto the retort stand upright |
| Listed grade | Superior (as named in the title) |
| Jaw opening and rod size | Confirm at enquiry |
Applications
- Individual acid-base titrations at student benches
- Potassium permanganate titrations, where the dark solution means the burette is read at the top of the meniscus
- Dispensing a measured volume of reagent dropwise during a preparation
- Holding a small chromatography column of burette-like diameter
Why Choose LabEquip
Teachers setting up one titration per student, and technicians replacing worn clamps on existing stands, are the usual buyers of single clamps. LabEquip lists it with other burette holders in the General Lab Products range; send your quantities with the diameter of your stand rods.
Frequently Asked Questions
What does Fisher type mean on a burette clamp?
It describes a pattern of clamp that fixes directly onto the stand rod with its own thumbscrew, instead of needing a separate boss head. The name is a catalogue convention for this design rather than a standard.
Is a single or a double burette clamp more suitable?
A single clamp suits one titration per stand and is simple to adjust. A double clamp holds two burettes and is used for back titrations or when two students share a stand.
Why is the burette read at the top of the meniscus with permanganate?
Potassium permanganate solution is so deeply coloured that the bottom of the meniscus cannot be seen. The top edge is read instead, consistently for both the initial and the final reading.
How high should the burette be clamped?
Set it so the tip sits just inside the neck of the conical flask, with room to swirl the flask on a white tile underneath. The tap should be where you can turn it with one hand while swirling with the other.
Can the clamp hold a burette with a PTFE key?
Yes. The clamp grips the barrel, not the tap, so glass-key and PTFE-key burettes are held the same way. Keep the tap clear of the jaws so it turns freely.
Why do the jaws have a coating?
The coating gives grip on smooth glass and prevents direct metal contact, which could scratch or chip the burette. Replace the clamp or re-cover the jaws if bare metal shows through.
Last Updated: September 2026










Reviews
There are no reviews yet.