Quick Answer: Plastic stopcocks are small valves with a turning key and barbed ends that push into flexible tubing, used to start, stop or redirect the flow of water, gas or solutions in a laboratory set-up. The listing photo shows a straight two-way stopcock and a T-shaped three-way one, both with red keys.
Two-Way and Three-Way Patterns
A two-way stopcock has one inlet and one outlet, so turning the key simply opens or closes the line. It is the tap on an aspirator bottle, the shut-off between a water pump and a filter flask, or the control on a water line to a condenser. A three-way stopcock has a third port, and the bore in its key connects different pairs of ports as it turns; one supply can then feed either of two outlets, or a line can be vented to air without disconnecting anything.
The photo shows serrated hose-barb ends, which grip flexible PVC, rubber or silicone tubing when the tube is pushed fully over the ridges. Valves of this kind are light, need no grease as ground-glass keys do, and are not brittle. They are not suited to high pressure, hot oil lines or solvents that attack the plastic, and the resin is not named in the title.
For a ground-glass connection with its own tap, see the right-angle cone adapter with stopcock; for a ready-made dispensing reservoir, the plastic carboy with stopcock comes with its tap fitted.
Applications
- Controlling cooling-water flow to a condenser in distillation or reflux set-ups
- Shutting off a vacuum line between a water pump and a filtration flask
- Switching a gas supply between two delivery tubes with a three-way stopcock
- Fitting a tap to an improvised aspirator bottle or a siphon line
Specifications
| Item | Plastic stopcock (valve) for flexible tubing |
| Forms in photo | Straight two-way and T-shaped three-way |
| Connections | Serrated hose-barb ends |
| Key | Turning key, shown in red in the photo |
Care & Handling
- Push tubing fully over the barbs, and secure it with a clip where the line is under pressure or vacuum.
- Turn the key gently; forcing a stiff key can crack the body or distort the seal.
- Flush with clean water after salt or sugar solutions, which dry into crystals that make the key stick.
- Check chemical resistance before passing organic solvents or concentrated acids through the valve.
Why Choose LabEquip
Chemistry technicians rely on small valves like these to build and repair tubing systems for water, gas and vacuum lines. You will find them in LabEquip’s chemistry lab equipment range; share the tubing size you use via the contact page.
Related Products
- Connectors (T & Y), Plastic: Plastic T and Y connectors with ribbed spigots for branching tubing lines alongside the stopcock.
- Carboy With Stop Cock, Plastic: A plastic carboy with a stopcock near the base, for dispensing distilled water or solutions.
- Filter Pump: A water-jet filter pump whose vacuum line can be isolated with a two-way stopcock.
- Socket Adapters, Straight Connection With Stop-cock: A glass socket adapter with stopcock for controlling a line right at a ground joint.
Frequently Asked Questions
What is the difference between a two-way and a three-way plastic stopcock?
A two-way stopcock has one inlet and one outlet, so turning the key opens or closes the line. A three-way stopcock has a third port, and its key connects different pairs of ports as it turns, so one supply can feed either of two outlets or a line can be vented. The listing photo shows both forms.
Do plastic stopcocks need grease?
No. Plastic keys seal by the close fit of plastic on plastic and turn without grease, unlike ground-glass keys. That also means no grease can wash into the liquid passing through.
What tubing fits the barbed ends of a plastic stopcock?
Flexible PVC, rubber or silicone tubing with a bore that fits snugly over the serrated barbs. Push the tubing fully over all the ridges; a small hose clip adds security on lines under pressure.
Can a plastic stopcock be used on a vacuum line?
It suits low-pressure work such as the line between a water filter pump and a filtering flask, provided thick-walled tubing is used. It is not intended for high vacuum, high pressure or hot oil lines.
How do I tell which way a three-way stopcock is open?
The handle or a mark on the key usually points along the open path. Before connecting it into a set-up, run water through it in each position to learn which ports connect, and label the ports if several people will use it.
Why has the key of a plastic stopcock become stiff?
Dried salts, sugars or residue in the key are the usual cause. Soak the stopcock in warm water, work the key gently back and forth and rinse it through. Never force it with pliers, which can crack the body.
Last Updated: November 2026









Reviews
There are no reviews yet.