Quick Answer: A Thiele tube is a glass tube with a looped side arm that holds a heating oil, used to find the melting point of a solid packed in a capillary tube beside a thermometer. Heating the side arm sets up convection that warms the oil evenly.
Convection Does the Stirring
The design, named after the German chemist Johannes Thiele, solves the problem of heating a thermometer and a tiny sample evenly without a stirrer. The tube is filled with a high-boiling oil to just above the upper junction of the side arm. When the lower bend of the arm is warmed with a small flame, the hot oil rises through the arm and flows back into the main tube, setting up a circulation that keeps the temperature around the thermometer bulb uniform.
The sample is packed a few millimetres deep into a capillary tube sealed at one end, which is fixed to the thermometer with a thin rubber ring so the sample sits beside the bulb. The thermometer is held in a cork with a notch cut in its side, so the apparatus is never sealed. Melting is watched through the glass, and the range from the first drop of liquid to a clear melt is recorded.
Specifications
| Item | Melting point tube with looped side arm (Thiele pattern) |
| Heating medium | High-boiling oil, commonly liquid paraffin or silicone oil |
| Heating point | Lower bend of the side arm, with a small flame |
| Sample holder | Capillary tube attached beside the thermometer bulb |
Care & Handling
- Keep the rubber ring that holds the capillary above the oil surface; hot oil softens rubber and the capillary can fall in.
- Fill the oil only slightly above the upper junction of the side arm, because oil expands as it heats and can spill over.
- Never heat the oil close to its smoke point, and keep water out of hot oil, which makes it spit violently.
- Let the oil cool fully before emptying or moving the tube, and cover it in storage to keep out dust and moisture.
Applications
- Determining the melting point of an organic solid as a test of identity
- Checking purity: a sharp melting range suggests a pure sample, a broad, low range an impure one
- Mixed melting point tests to confirm whether two samples are the same compound
- Boiling point determination of small liquid samples with an inverted capillary
Why Choose LabEquip
College organic laboratories and pharmacy departments use Thiele tubes for melting point work when an electrical apparatus is not available for every student. LabEquip lists it in the chemistry lab equipment range, and organic solids for these practicals keep well in the clear glass wide mouth reagent bottle; send quantities via the contact page.
Related Products
- Capillary Tube: Fine-bore glass capillary tubing from which melting point tubes are sealed and filled.
- Heating 4 L bath for oil: A 4 L heated oil bath for melting point and reaction work that needs even heating without a flame.
- Bunsen Burner Pair with Stop Cock: A pair of Bunsen burners with stop cocks, for the small flame used on the Thiele side arm.
- Three Finger Condenser Clamp: A three-finger clamp for holding the Thiele tube steadily by its neck on a stand.
Frequently Asked Questions
Why is the side arm of a Thiele tube heated instead of the bottom?
Heating the lower bend of the side arm sets up a convection current: hot oil rises through the arm and flows back into the main tube. That circulation keeps the temperature around the thermometer bulb and the sample even without a stirrer.
Which oil should be used in a Thiele melting point tube?
A high-boiling oil such as liquid paraffin is used for moderate temperatures and silicone oil for higher ones. Fill to just above the upper junction of the side arm, and replace oil that has darkened, which makes the sample hard to see.
How fast should a Thiele tube be heated near the melting point?
Heat fairly quickly to within about 10 degrees of the expected melting point, then slowly, about 1 to 2 degrees per minute. Heating too fast lets the oil temperature run ahead of the sample and thermometer, so the recorded range comes out high and broad.
What does a broad melting range tell me about my sample?
A pure solid melts sharply, usually over a degree or two. A wide range, often starting lower than expected, shows that the sample is impure or still wet with solvent, so it may need recrystallising or further drying.
What is a mixed melting point test?
Mix the unknown with a known sample of the compound it is thought to be and find the melting point of the mixture. If they are the same compound, the melting point stays sharp and unchanged; if they differ, it drops and broadens.
Why is the thermometer held in a notched cork in a Thiele tube?
The notch lets air in and out as the oil heats and expands, so the apparatus is never sealed. A solid stopper would let pressure build and could force the cork or oil out.
Last Updated: November 2026









Reviews
There are no reviews yet.