Search

In Stock

Receiver Adapter, Vertical Delivery, Socket To Cone

CNC-Ground Standard Taper Interfaces: Features precision-engineered 1:10 taper sockets and cones that achieve high-vacuum matte finishes, ensuring hermetic, leak-proof connectivity in complex glassware assemblies.

High-Purity Borosilicate 3.3 Composition: Manufactured from Type I Class A borosilicate glass with a low linear expansion coefficient, providing exceptional thermal shock resistance and chemical durability.

₹399.00

Quick Answer: A vertical delivery receiver adapter with socket to cone is a glass fitting that takes the condenser’s outlet cone in its socket and turns the distillate so it leaves through a ground cone pointing straight down. The receiver fits onto that cone and sits upright directly beneath.

An Upright, Jointed Receiver

The point of vertical delivery is the position of the receiver. With the delivery cone pointing straight down, a round-bottomed or pear-shaped flask with a ground neck sits exactly upright on it, clamped or resting on a support. The drip falls into the centre of the flask rather than onto its wall, and the flask can be lowered off the cone and replaced without disturbing the condenser.

Socket to cone describes the joints in the direction of flow: socket upstream for the condenser cone, cone downstream for the receiver. That arrangement keeps liquid on the inside of each joint. Because both ends are ground joints and the title names no side tube, the train is closed at this end once a receiver is fitted, so at normal pressure the adapter belongs in a set that vents elsewhere; otherwise choose the vented pattern.

This adapter suits work where the product should end up in a jointed flask: collecting into a pre-weighed receiver to find the yield, or distilling a reagent straight into the flask in which it will be used next.

Specifications

Type Receiver adapter, vertical delivery
Upper end Ground socket for the condenser outlet cone
Lower end Ground cone pointing vertically down
Side tube None named in the title

Care & Handling

  • Hold the receiver on the cone with a plastic joint clip and support it from below; a filled flask should never hang from the joint alone.
  • Before heating, confirm that the set has an open vent somewhere, since this adapter seals the receiver end.
  • Keep grease off the tip of the delivery cone, where the running distillate would wash it into the product.

Applications

  • Collecting distillate into a jointed round-bottomed flask for direct use in the next reaction step
  • Distilling into a pre-weighed receiver to determine yield
  • Assemblies in which receivers must be exchanged quickly without moving the condenser
  • Ground-joint teaching kits for college organic practicals

Why Choose LabEquip

Organic chemistry labs that carry a distillate straight on to the next step order this adapter because the product ends up in a jointed flask ready for use. LabEquip lists it in its chemistry lab equipment range with the round bottom flask that fits the delivery cone; send joint sizes on the contact page.

Related Products

Frequently Asked Questions

What does socket to cone mean on a receiver adapter?

It describes the joints in the direction of flow: a ground socket at the top receives the condenser’s outlet cone, and a ground cone at the bottom fits into the receiver’s neck. That arrangement keeps the liquid on the inside of each joint as it flows down.

Why choose a vertical delivery receiver adapter?

With the delivery cone pointing straight down, a round-bottomed or pear-shaped flask with a ground neck sits exactly upright on it. The drip falls into the centre of the flask rather than onto the wall, and the flask can be lowered off and replaced without disturbing the condenser.

Is the apparatus sealed when a receiver is fitted to this adapter?

Yes. Both ends are ground joints and no side tube is named, so fitting a receiver closes the train at this end. At normal pressure the set must vent elsewhere, for example through a vented still head, before any heating starts.

How should the receiver under a vertical adapter be supported?

Hold the receiver with a joint clip on the cone and support it from below with a cork ring, flask stand or clamp on its neck. Do not let a filling flask hang from the joint alone, since its growing weight can pull the joint apart.

Can the product be weighed directly in the receiving flask?

Yes, that is a useful feature of a jointed receiver. Weigh the empty flask with its stopper first, collect the distillate, then remove the flask, stopper it and weigh again. The difference is the mass of product, with no transfer losses.

Should the delivery cone of the adapter be greased?

For atmospheric work a clean dry joint is usually enough and keeps grease out of the product. Under vacuum, or if the joint tends to stick, apply a very thin film to the upper part of the cone only, away from the drip path.

Last Updated: November 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
INR Indian rupee
Product has been added to your cart
Compare (0)