Quick Answer: A cone adapter with stopcock is a glass fitting with a ground-glass cone, a stopcock tap and a side tube bent at a right angle. It connects a flask or apparatus to a gas or vacuum line and lets the connection be opened or closed at the joint, isolating the vessel without disconnecting the tubing.
Isolating a Vessel at the Joint
The tap is what separates this fitting from the plain angle and straight types. With the stopcock open, gas or vacuum passes between the tubing and the flask; turning it closes the flask off, so the flask can be taken away from the line, kept under an inert atmosphere or left under reduced pressure while the tubing is moved elsewhere. The right-angle side tube lets the tubing leave horizontally, which suits a flask clamped in a rack or standing beside a manifold.
The classic use is evacuate-and-refill: a flask containing an air-sensitive solid or solvent is connected, evacuated, then refilled with nitrogen or argon, and the cycle is repeated a few times before the tap is closed. The same fitting holds a dried flask under vacuum while it cools, lets air or gas into an evacuated flask gently, and vents pressure in a controlled way.
Glass keys need a thin film of grease; PTFE keys run dry. For lines that do not need a tap, see the angled cone adapter.
Applications
- Evacuate-and-refill cycles for storing or reacting air-sensitive materials under nitrogen
- Keeping an oven-dried flask under vacuum or dry gas while it cools
- Admitting air slowly to an evacuated flask after drying
- Isolating one flask from a shared gas or vacuum manifold
Specifications
| Joint end | Ground-glass cone |
| Control | Stopcock to open or close the line at the joint |
| Side tube | Right-angle connection for tubing |
| Uses | Inert gas and vacuum lines, isolating flasks, controlled venting |
Care & Handling
- Turn the stopcock gently; forcing a stiff glass key can break the barrel, and warm water around the barrel often frees it.
- Grease glass keys sparingly in two bands on either side of the bore, keeping the bore itself clear.
- Store with glass keys removed or loosened and a slip of paper in the barrel, and keep each key with its own adapter.
- Open the tap slowly when letting gas into an evacuated flask, so powders are not blown about.
Why Choose LabEquip
Research groups and advanced college labs that handle moisture- or air-sensitive chemistry use stopcock adapters on almost every flask. LabEquip provides this fitting from its chemistry lab equipment section; send the joint size and preferred key material through the contact page.
Related Products
- Socket Adapters, Straight Connection With Stop-cock: A socket adapter with stopcock in a straight connection, the in-line version of this tap fitting.
- Cone Adapters, Angle Connection: An angled cone adapter without a tap for permanently open gas or vent lines.
- Receiver Adapter, Bent With Vacuum Connection, Socket To Cone: A bent receiver adapter with vacuum connection for vacuum distillation set-ups.
- Stop Cocks, Plastic: Plastic stopcocks for controlling flow in flexible tubing away from the glass.
Frequently Asked Questions
What is a cone adapter with stopcock used for?
It connects a flask or apparatus to a gas or vacuum line through a ground-glass cone, a stopcock and a right-angle side tube. The tap lets the connection be opened or closed at the joint without disconnecting the tubing.
How do you keep a flask under inert gas with a stopcock adapter?
With the tap open, flush the flask with the inert gas from the line, then close the stopcock. The flask stays filled with the gas and can be removed from the line while the tubing is used elsewhere.
How do you release vacuum safely using a stopcock adapter?
Close the tap to isolate the flask from the pump, switch off or vent the pump side, then open the stopcock slowly to let air or inert gas back in. Sudden venting can blow solids around or crack thin glass.
Should the stopcock on a glass adapter be greased?
A glass stopcock needs a thin film of grease to turn smoothly and seal; a PTFE key needs none. Check the key material of your adapter and keep grease away from the bore.
How is a stopcock adapter different from a plain angled cone adapter?
Both lead tubing sideways from a socket. The stopcock version adds a tap, so a vessel can be isolated, kept under vacuum or vented in a controlled way. The plain adapter is always open.
What should be checked before using a stopcock adapter under vacuum?
Inspect the glass for cracks, make sure the key turns freely and seals, use thick-walled vacuum tubing and secure the cone with a joint clip. Wear eye protection when evacuating glassware.
Last Updated: November 2026










Reviews
There are no reviews yet.