Search

In Stock

Stop Cocks, Plastic

Multi-Port Fluid Management: Available in bidirectional and tridirectional configurations, these stopcocks feature precision-machined internal plugs that ensure a 360-degree hermetic seal under low-to-medium pressure environments.

Serrated Universal Barbs: Integrated tapered hose connections provide high-friction retention for various flexible tubing diameters, preventing accidental disconnection and ensuring laminar flow during hazardous chemical transfers or pressurized fluid delivery.

$3.16

Quick Answer: Plastic stopcocks are small valves with a turning key and barbed ends that push into flexible tubing, used to start, stop or redirect the flow of water, gas or solutions in a laboratory set-up. The listing photo shows a straight two-way stopcock and a T-shaped three-way one, both with red keys.

Two-Way and Three-Way Patterns

A two-way stopcock has one inlet and one outlet, so turning the key simply opens or closes the line. It is the tap on an aspirator bottle, the shut-off between a water pump and a filter flask, or the control on a water line to a condenser. A three-way stopcock has a third port, and the bore in its key connects different pairs of ports as it turns; one supply can then feed either of two outlets, or a line can be vented to air without disconnecting anything.

The photo shows serrated hose-barb ends, which grip flexible PVC, rubber or silicone tubing when the tube is pushed fully over the ridges. Valves of this kind are light, need no grease as ground-glass keys do, and are not brittle. They are not suited to high pressure, hot oil lines or solvents that attack the plastic, and the resin is not named in the title.

For a ground-glass connection with its own tap, see the right-angle cone adapter with stopcock; for a ready-made dispensing reservoir, the plastic carboy with stopcock comes with its tap fitted.

Applications

  • Controlling cooling-water flow to a condenser in distillation or reflux set-ups
  • Shutting off a vacuum line between a water pump and a filtration flask
  • Switching a gas supply between two delivery tubes with a three-way stopcock
  • Fitting a tap to an improvised aspirator bottle or a siphon line

Specifications

Item Plastic stopcock (valve) for flexible tubing
Forms in photo Straight two-way and T-shaped three-way
Connections Serrated hose-barb ends
Key Turning key, shown in red in the photo

Care & Handling

  • Push tubing fully over the barbs, and secure it with a clip where the line is under pressure or vacuum.
  • Turn the key gently; forcing a stiff key can crack the body or distort the seal.
  • Flush with clean water after salt or sugar solutions, which dry into crystals that make the key stick.
  • Check chemical resistance before passing organic solvents or concentrated acids through the valve.

Why Choose LabEquip

Chemistry technicians rely on small valves like these to build and repair tubing systems for water, gas and vacuum lines. You will find them in LabEquip’s chemistry lab equipment range; share the tubing size you use via the contact page.

Related Products

Frequently Asked Questions

What is the difference between a two-way and a three-way plastic stopcock?

A two-way stopcock has one inlet and one outlet, so turning the key opens or closes the line. A three-way stopcock has a third port, and its key connects different pairs of ports as it turns, so one supply can feed either of two outlets or a line can be vented. The listing photo shows both forms.

Do plastic stopcocks need grease?

No. Plastic keys seal by the close fit of plastic on plastic and turn without grease, unlike ground-glass keys. That also means no grease can wash into the liquid passing through.

What tubing fits the barbed ends of a plastic stopcock?

Flexible PVC, rubber or silicone tubing with a bore that fits snugly over the serrated barbs. Push the tubing fully over all the ridges; a small hose clip adds security on lines under pressure.

Can a plastic stopcock be used on a vacuum line?

It suits low-pressure work such as the line between a water filter pump and a filtering flask, provided thick-walled tubing is used. It is not intended for high vacuum, high pressure or hot oil lines.

How do I tell which way a three-way stopcock is open?

The handle or a mark on the key usually points along the open path. Before connecting it into a set-up, run water through it in each position to learn which ports connect, and label the ports if several people will use it.

Why has the key of a plastic stopcock become stiff?

Dried salts, sugars or residue in the key are the usual cause. Soak the stopcock in warm water, work the key gently back and forth and rinse it through. Never force it with pliers, which can crack the body.

Last Updated: November 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
USD United States (US) dollar
Product has been added to your cart
Compare (0)