Search

In Stock

Vertical pendulum pack with excitation system

Pack Pendule vertical avec système d'excitation, Integrated Damping Interface enables the technical analysis of logarithmic decrement and Q-factor across varied viscous media, reinforcing "Evaluate" level proficiencies.

Graduated Angular Scale supports accurate student application of mathematical models for phase shift and resonant frequency verification during laboratory trials.

$140.44

Quick Answer: This vertical spring pendulum pack hangs a mass from a helical spring and adds an excitation system that moves the top of the spring up and down, so students can study the mass-spring oscillator both oscillating freely and driven at a chosen frequency. Its main use is the forced oscillation and resonance practical.

From Free to Driven Oscillation

Left alone, a mass m on a spring of stiffness k bounces vertically with natural frequency f₀ = (1/2π)√(k/m). Gravity only shifts the rest position downwards by mg/k and does not change the frequency, which is why the vertical arrangement gives the same result as a horizontal one without the friction of a track. Students find k first by loading the spring with known masses and measuring the extension, then compare the predicted f₀ with a timed value.

The excitation system turns the set-up into a driven oscillator. Moving the suspension point periodically feeds energy into the spring, and after the start-up transient the mass oscillates at the driving frequency rather than its own. How far it moves depends on how close the driving frequency is to f₀ and on how much damping is present.

Recording a Resonance Curve

In the practical the driving frequency is raised in small steps, more finely near f₀, and the steady amplitude of the mass is read against a scale or with a motion sensor at each step. Plotted against frequency, the amplitude rises to a peak near f₀ and falls away on either side. Adding damping, for example a light card disc on the mass to increase air drag, lowers and broadens the peak, which makes the link between damping and sharpness of resonance visible.

Phase is a useful extra observation. Well below resonance the mass moves almost in step with the driver; well above, it moves almost opposite to it. Asking students to describe this before measuring anything is a quick check that they understand what the resonance curve means. How the drive frequency is set and read depends on the excitation unit supplied and should be confirmed when ordering.

What the Pack Is Used For

  • Measuring the spring constant by static loading and again by timing oscillations
  • Plotting amplitude against driving frequency to locate resonance
  • Comparing resonance peaks with and without added damping
  • Showing the change of phase between driver and mass across resonance
  • Relating resonance to vehicle suspensions and vibrating structures

Specifications

Apparatus Vertical mass-spring oscillator with an excitation (driving) system
Motion Vertical oscillation of a mass on a helical spring
Natural frequency f₀ = (1/2π)√(k/m) for the spring and mass in use
Driving Excitation system moves the suspension point of the spring periodically
Studies Free oscillation, forced oscillation, resonance and damping
Pack contents, drive unit and supply Confirm at enquiry

Care & Handling

  • Do not hang more mass than the spring takes without permanent stretching, as an overstretched spring changes k
  • Raise the driving amplitude gradually near resonance so the mass does not strike the base or jump off its hanger
  • Keep fingers clear of the moving parts of the excitation system while it runs
  • Follow the electrical safety guidance for the drive unit and switch off before adjusting the mounting
  • Store springs unloaded

Why Choose LabEquip

Physics departments teaching forced oscillation buy this pack for senior-school and first-year college practicals. LabEquip offers it alongside the forced oscillations kit and Pohl’s pendulum, which gives a rotational version of the same study, in its physics lab equipment range. Share your power supply details through LabEquip contact.

Frequently Asked Questions

Does gravity change the frequency of a vertical spring pendulum?

No. Gravity only moves the equilibrium position down by mg/k. The oscillation about that new position has the same frequency, (1/2π)√(k/m), as it would have horizontally.

What is the difference between free and forced oscillation?

In free oscillation the mass vibrates at its own natural frequency after being released. In forced oscillation an external driver sets the frequency, and the mass settles to that frequency once the start-up motion dies away.

Why is the amplitude largest near the natural frequency?

Near resonance the driver pushes in step with the motion of the mass, so each cycle adds energy efficiently. The amplitude grows until the energy lost to damping in each cycle balances the energy supplied.

How can I add damping to the experiment?

Fixing a light card disc to the mass increases air resistance. Letting the mass move in a beaker of water damps it much more strongly. Compare the resonance peaks for each arrangement.

How do I measure the spring constant?

Hang known masses, measure the extension for each, and take k as the gradient of force against extension. A second value comes from timing oscillations and using k = 4π²m/T², and the two should agree.

Which driver and power supply does the excitation system use?

The listing does not specify the drive unit. Tell us your supply voltage and whether you already have a signal generator, and we will confirm what the pack needs.

Last Updated: October 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
USD United States (US) dollar
Product has been added to your cart
Compare (0)