Quick Answer: Pohl’s pendulum is a rotary oscillator: a metal wheel held by a spiral spring turns back and forth about its axle, and its angle is read against a scale on the rim. Universities and senior physics labs use Pohl’s pendulum to study free, damped and driven oscillations on one apparatus.
How Pohl’s Rotary Pendulum Works
The wheel and spiral spring form a torsional oscillator. Twisting the wheel winds the spring, which supplies a restoring torque proportional to the angle, so the motion is simple harmonic with a period set by the moment of inertia of the wheel and the stiffness of the spring. Because the wheel turns about a fixed axle, its amplitude reads directly as an angle on the scale, and slow, wide swings are easy to follow by eye.
Robert Pohl’s design adds two features that turn the pendulum into a resonance apparatus. An electromagnet close to the rim acts as an eddy-current brake: currents induced in the moving metal wheel oppose its motion, and raising the magnet current increases the damping. A motor with an eccentric and connecting rod moves the outer end of the spring to and fro, so the wheel can be forced at a chosen frequency. Which brake and drive arrangement comes with the listed unit should be confirmed before ordering.
Specifications
| Apparatus | Rotary (torsion) pendulum after Pohl |
| Oscillator | Wheel on a spiral spring, angle read on a rim scale |
| Damping in the classic design | Adjustable eddy-current brake |
| Forcing in the classic design | Motor-driven eccentric acting on the spring |
| Studies | Free, damped and forced oscillation, resonance and phase |
| Supply, drive and brake details | Confirm at enquiry |
Experiments in Sequence
Students usually start with free oscillation, timing several swings to find the natural period, then switch on a small brake current and record successive amplitudes on one side. For viscous damping the ratio of one amplitude to the next stays constant, and its natural log is the logarithmic decrement. Repeating at higher brake currents shows the decay becoming faster until the wheel no longer overshoots zero.
For forced oscillation the motor frequency is stepped through the natural frequency while the brake stays at one setting, and the steady amplitude is read once the transient has died away. Plotting amplitude against driving frequency gives the resonance curve, which grows taller and narrower as damping is reduced. Comparing the drive pointer with the wheel also shows the phase lag moving from nearly in step at low frequency, through a quarter cycle at resonance, to nearly opposite at high frequency.
Typical Laboratory Uses
- Measuring the natural period and checking that it does not depend on amplitude
- Finding the logarithmic decrement and damping constant at several brake currents
- Plotting resonance curves for light, medium and heavy damping
- Observing the phase difference between drive and response across resonance
Care & Handling
- Avoid driving the wheel at resonance with no damping, as very large swings strain the spiral spring
- Keep steel tools and filings away from the gap of the eddy-current brake
- Set the pointer to zero at rest before each run, and never bend the pointer to adjust it
- Use the electrical supplies under supervision and switch off before changing connections
- Cover the apparatus when not in use so dust does not reach the bearing
Why Choose LabEquip
This rotary pendulum is bought mainly by universities, engineering colleges and senior school labs that teach oscillations quantitatively. LabEquip can supply it with a set of coupled pendulums for the energy-exchange part of the same topic, within its physics lab equipment range. Send your syllabus and mains supply details via LabEquip contact.
Frequently Asked Questions
Why is the wheel made of a conducting metal?
The damping relies on eddy currents. When the wheel moves through the field of the brake magnet, currents are induced in the metal and their magnetic effect opposes the motion. A non-conducting wheel would not be braked.
What does the logarithmic decrement tell you?
It is the natural log of the ratio of two successive amplitudes on the same side. For viscous damping it stays constant during the decay and equals the damping constant multiplied by the period.
Why does the phase lag reach a quarter cycle at resonance?
At resonance the driving torque is in step with the angular velocity of the wheel, so energy is fed in at the most effective moment of each cycle. Velocity leads displacement by a quarter cycle, so the displacement lags the drive by that amount.
How long should I wait before reading the forced amplitude?
Wait until the amplitude stops changing from one swing to the next. The transient motion dies away faster with more damping, so light damping needs a longer wait at each driving frequency.
How does it differ from a plain torsion pendulum?
Both are rotary oscillators. A plain torsion pendulum hangs a body from a twisted wire and is used mainly to find rigidity or moment of inertia, while the Pohl design adds controllable damping and a motor drive so resonance and phase can be studied.
Is this apparatus suitable for school students?
It suits senior secondary students for qualitative resonance demonstrations, and college students for full quantitative work on damping and resonance curves. The rim scale lets a small group read the swing together.
Last Updated: October 2026










Reviews
There are no reviews yet.