Quick Answer: The 6/24 V transformer is a bench step-down transformer on a base with output terminals and a switch, providing the 6 V and 24 V alternating voltages named in its title for school physics and electricity experiments. It brings mains power down to low experimental voltages and is a supply unit, not a model to be taken apart.
What the Transformer Is For
Many school experiments need a low alternating voltage: lamps and heaters on AC, induction and transformer practicals, vibrators and some electromagnets. This unit offers two such voltages, the lower for bench work with small lamps and coils, the higher for apparatus designed for 24 V AC. In the product photograph the transformer sits on a dark base with yellow output terminals and a switch.
The outputs are alternating; a transformer on its own does not produce direct current. For DC experiments a rectifier and smoothing capacitor are added after it, or a battery eliminator that already contains them is used instead.
Choosing 6 V or 24 V
Always match the output to the rating of the apparatus. A 6 V lamp on the 24 V terminals burns out at once, while a 24 V device on 6 V simply under-performs. Under load the output falls a little below its open-circuit value, so when an experiment depends on the exact voltage, a meter reading taken at the apparatus is more reliable than the label alone.
Specifications
| Type | Bench step-down transformer on a base |
| Output voltages | 6 V and 24 V AC, as titled |
| Outputs | Terminals on the base, as pictured |
| Control | Switch on the base, as pictured |
| Input voltage and output current rating | Confirm at enquiry |
Uses
- Supplying low-voltage AC to lamps, coils and heaters
- Powering apparatus rated for 24 V AC
- Providing the primary supply for demountable transformer practicals
- Feeding a rectifier circuit in a power-supply practical
Care & Handling
- Use it indoors on a dry bench, with the mains lead and plug in good condition
- Stay within the output current rating and switch off if the transformer becomes hot
- Do not join the outputs together or short the terminals
- Have the unit checked by a competent person if the case or lead is damaged
Why Choose LabEquip
The 6/24 V transformer is bought for physics benches that need dependable low-voltage AC without a full variable supply on every bench. LabEquip offers it with the transformer module and coils and other physics lab equipment; ask about input voltage options through the contact page.
Frequently Asked Questions
Does this transformer give AC or DC?
A transformer alone gives alternating current. For direct current a rectifier and smoothing stage must be added, or a battery eliminator used.
Why does the output voltage drop when a load is connected?
The windings have resistance and some flux leaks, so part of the voltage is lost inside the transformer as current flows. The drop grows with the load current.
Can it supply a demountable transformer kit?
Yes, if the kit’s primary coil is designed for one of these voltages. Check the coil rating and use the matching terminals.
Why is 24 V used for some apparatus?
A higher voltage delivers the same power at a lower current, which suits heaters, motors and vibrators that would need large currents at 6 V, while 24 V is still a low voltage for bench work.
What should I do if the transformer gets hot?
Switch off and disconnect the load. Heating means the current drawn is too high or the unit has been run for too long under heavy load.
Can students use it themselves?
Students can use the low-voltage outputs under supervision. The mains connection should be handled and inspected only by staff.
Last Updated: October 2026










Reviews
There are no reviews yet.