Search

In Stock

Torsion Pendulum

Precision Inertia Assembly: Features a heavy, nickel-plated brass disc (12.5cm diameter) with a concentric groove for cylinder placement, ensuring uniform mass distribution during oscillation.

High-Tension Suspension System: Equipped with a reinforced chuck-and-socket mechanism designed to eliminate slippage and accommodate various wire gauges for comparative material analysis.

$9.02

Quick Answer: The Torsion Pendulum is a disc or similar body hung centrally from a wire clamped at its upper end, so that, once twisted and released, it turns back and forth about the wire in angular simple harmonic motion. The torsion pendulum is used to find the modulus of rigidity of the wire and to compare the moments of inertia of bodies.

Restoring Couple and Period

Twisting the disc through an angle θ twists the wire, and the wire pushes back with a restoring couple Cθ. The constant C depends on the material and shape of the wire: C = πηr⁴/2l, with η the modulus of rigidity, r the radius and l the length. A restoring couple proportional to angle gives simple harmonic motion, and the period is T = 2π√(I/C), where I is the moment of inertia of the disc about the wire.

A simple pendulum’s period lengthens noticeably at large swings, because its restoring force depends on sin θ. A disc twisting on a wire keeps the same period at large and small angles, as long as the wire stays within its elastic limit. Students can test this by timing oscillations started from a quarter turn and from a small nudge. The same property made torsion balances the instrument of choice for measuring tiny forces, from Coulomb’s law of electrostatic force to Cavendish’s measurement of the gravitational constant.

For the rigidity experiment, the disc’s moment of inertia is calculated from its mass and radius as ½MR², the period is timed, and η = 8πIl/(r⁴T²). If a second body of known inertia is added, the change in period gives η without the disc’s own inertia, which is how irregular or fitted discs are handled.

Uses

  • Determining the modulus of rigidity of a wire from the period of a disc of known moment of inertia
  • Showing that torsional oscillations keep the same period over a wide range of amplitudes
  • Comparing the moments of inertia of a disc, a ring and an irregular body by their periods
  • Studying how the period changes with wire length and wire radius
  • Introducing the torsion balances used in classic measurements of very small forces

Care & Handling

  • Clamp the wire of the torsion pendulum tightly at both ends so it cannot slip in the chucks; slipping lengthens the period unpredictably.
  • Start the oscillations by turning the disc, not the wire, and avoid twisting through so many turns that the wire takes a permanent set.
  • Damp out any pendulum-like swinging before timing by steadying the disc gently with both hands.
  • Unload the wire after use and store spare wires coiled loosely, never kinked.

Specifications

Arrangement Disc hung centrally from a wire with a fixed upper clamp
Motion Angular simple harmonic motion about the wire
Period T = 2π√(I/C), with C = πηr⁴/2l
Results Modulus of rigidity; comparison of moments of inertia
Wire, disc size and support Confirm at enquiry

Why Choose LabEquip

The torsion pendulum is a standard practical in college physics courses on elasticity and rotational motion. LabEquip also lists a bridge type version, which hangs its wire from a fixed frame, among its physics lab equipment. Send quantities and wire requirements through the contact page.

Frequently Asked Questions

Why does the period not depend on amplitude?

The wire’s restoring couple is exactly proportional to the angle of twist within the elastic limit. A restoring effect proportional to displacement always gives simple harmonic motion, whose period is independent of amplitude. A simple pendulum only approximates this at small angles.

Why does the wire radius matter so much?

The stiffness of the wire depends on the fourth power of its radius. Doubling the radius makes the wire sixteen times stiffer and the period four times shorter, so the radius must be measured very precisely.

Can the pendulum compare moments of inertia?

Yes. With the same wire, T² is proportional to I. Timing two bodies in turn gives the ratio of their moments of inertia directly, without knowing anything about the wire.

Why should the disc not swing sideways?

Sideways swinging is a second kind of motion, a pendulum swing, mixed in with the twisting. It makes the reference mark move irregularly and spoils the count. Steady the disc and restart with a pure twist.

What wire is suitable?

Steel, brass or copper wires are common, because their rigidity is well known for comparison. The wire must be straight, uniform and free of kinks, and thin enough that the oscillations are slow enough to time.

How is the modulus of rigidity calculated?

With I the moment of inertia of the disc, l the length and r the radius of the wire, and T the period, η = 8πIl/(r⁴T²). Use SI units throughout to get η in newtons per square metre.

Last Updated: October 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
USD United States (US) dollar
Product has been added to your cart
Compare (0)