Search

In Stock

Small Model Calorimeter

Calorimètre petit modèle Features a low-mass, factory-calibrated inner calorimeter vessel nested within a robust outer jacket, separated by a high-performance thermal insulation barrier to eliminate ambient heat exchange.

Interlocking Safety Lid System Equipped with a precision-fit, non-conductive cover featuring pre-drilled apertures for standardized laboratory stirrers and digital temperature probes, ensuring a sealed-system environment during caloric exchange.

₹1,620.00

Quick Answer: The small model calorimeter is a compact calorimeter for student practicals that use small quantities of water and small samples. Its size means temperatures settle quickly, so the small model calorimeter suits short lessons in which each group completes several runs.

What Changes When a Calorimeter Is Small

Scaling a calorimeter down has two effects that pull in opposite directions. A small volume of water reaches a uniform temperature quickly and needs only a small sample to show a measurable change, so each run is short. But a smaller body of liquid has more surface area relative to its volume, and the vessel itself is a larger share of what is being heated, so both heat loss and the vessel’s own heat capacity matter more.

Good technique with a small calorimeter therefore rests on two habits: always include the vessel’s heat capacity, expressed as a water equivalent, and keep each measurement short so that heat exchanged with the room stays small.

Finding the Water Equivalent

Expressed as a water equivalent, the vessel’s heat capacity becomes a mass of water: the amount that would take up as much heat as the empty calorimeter for the same rise in temperature. To measure it, weigh some cold water into the calorimeter, add a weighed quantity of warm water, stir and record the final temperature. The heat given up by the warm water, minus the heat taken in by the cold water, is the heat taken up by the vessel; dividing by the temperature rise and by the specific heat capacity of water gives its water equivalent.

With that value known, the calorimeter is ready for quick experiments such as the specific latent heat of fusion of ice. Drop a small, dried ice cube into warm water, stir until it melts, and use the fall in temperature to work out how much energy the ice needed to melt and then warm to the final temperature.

Specifications

Product Small calorimeter for student heat experiments
Suited to Small water volumes and small samples, short runs
Typical measurements Water equivalent, specific heat capacity, latent heat of fusion of ice
Key point Vessel heat capacity is a larger share of the total and must be included
Capacity, material and fittings Confirm at enquiry

Quick Experiments

  • Determining the water equivalent of the vessel itself
  • Latent heat of fusion of ice with a small ice cube
  • Specific heat capacity of small metal samples
  • Group practicals in short lessons where several repeats are needed

Care & Handling

  • Dry ice cubes on a paper towel before adding them, so that no water at 0 °C is carried in
  • Weigh the calorimeter with water before and after the run, as small masses make weighing errors significant
  • Keep the calorimeter in its insulating jacket or holder during measurements
  • Rinse and dry it after use so that mineral deposits do not build up

Why Choose LabEquip

The small model calorimeter is chosen by schools that want each pair of students to run a calorimetry practical within a single lesson. For larger volumes see the copper calorimeter, and for minimal heat loss the Dewar flask calorimeter; contact LabEquip for class sets.

Frequently Asked Questions

What is the advantage of a small calorimeter?

Small volumes of water warm up and settle to a uniform temperature quickly, and small samples are enough to give a clear temperature change. Each run is short, so groups can repeat measurements within one lesson.

What does the term water equivalent mean?

It converts the vessel’s heat capacity into an equivalent mass of water, so the calorimeter can be treated as extra water in the calculation. Adding it to the real mass of water accounts for the heat the vessel absorbs.

Why does the vessel’s heat capacity matter more in a small calorimeter?

With only a little water present, the vessel absorbs a larger share of the heat. Ignoring it would cause a bigger error than in a large calorimeter holding much more water.

How do students find the latent heat of fusion of ice with it?

Add a weighed, dried ice cube to warm water, stir until it melts and record the lowest temperature. The warm water and the vessel give up exactly the heat needed to melt the ice and then bring the meltwater to the final temperature.

Why should ice cubes be dried before use?

Any water clinging to the ice is already melted, so it needs no latent heat. Including it would make the measured latent heat come out too low.

How accurate are measurements with a small calorimeter?

With careful weighing, the water equivalent included and short runs, results are good enough to compare with accepted values and discuss sources of error. Accurate weighing of the small masses is the most important step.

Last Updated: October 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
INR Indian rupee
Product has been added to your cart
Compare (0)