Search

In Stock

Replacement Membranes for Water Manometer

Membranes de rechange pour Manoscope à eau, Uniform Thickness Calibration Ensures repeatable data acquisition for the Evaluation of isotropic pressure distribution in static fluids across multiple laboratory groups.

Chemical-Resistant Surface Treatment Supports long-duration Application in varied aqueous environments without material fatigue, minimizing calibration drift during semester-long mechanics modules.

$9.64

Quick Answer: Water manometer membranes are thin elastic sheets stretched over the open face of a pressure capsule that is read on a water manometer. Replacement water manometer membranes restore a capsule whose old membrane has split, sagged or stiffened, so the readings follow depth again.

Why Membranes Wear Out

Thin rubber does not last for ever. Oxygen, ozone and sunlight slowly attack it, so an old membrane turns sticky or brittle and develops fine cracks. Repeated stretching leaves it slack, and a fingernail or a sharp edge in the tank can puncture it. Because the membrane is the only part of the capsule that senses the liquid, its condition decides whether the experiment works.

The symptoms are easy to recognise: the manometer level creeps back while the capsule is held still at one depth, a stream of tiny bubbles rises from the capsule, or the readings fall well short of the depth. Any of these means it is time to fit a fresh membrane.

Fitting a New Membrane

Remove the old membrane and its retaining ring or band, and wipe the rim of the capsule clean and dry. Lay the new membrane over the rim and stretch it just enough to take out the wrinkles. Resist making it drum-tight: a tight membrane holds part of the pressure in its own tension and the manometer then under-reads. Secure it evenly all round with the ring or band.

Test the seal before using it in liquid. Press the centre gently with a fingertip and watch the manometer: the level should rise, stay steady while you hold and return when you let go. A level that drifts back points to a leak at the rim or in the tubing. Finally, lower the capsule to a measured depth and compare the reading with that depth.

Specifications

Product Replacement membranes for manometer pressure capsules
Purpose Restoring the sensing face of a pressure capsule
Usually held by The capsule’s retaining ring or an elastic band
Used in Liquid pressure experiments with a water manometer
Size, material and quantity per pack Confirm at enquiry

When to Use Them

  • Replacing a split or perished membrane on a pressure capsule
  • Restoring the sensitivity of a capsule that under-reads
  • Keeping spares for a class set of capsules
  • Fitting a fresh membrane before a calibration or comparison run

Care & Handling

  • Store spares in a closed bag, cool and away from sunlight and electric motors
  • Keep oils, greases and solvents off the rubber
  • Handle membranes with clean, dry hands and short fingernails
  • Discard any membrane that is sticky, cracked or has lost its stretch

Why Choose LabEquip

Schools with pressure capsules in regular use need spares on the shelf, so that a split membrane does not stop a practical. Order them with a new pressure capsule or for a capsule already used with a U-tube manometer; contact LabEquip with your capsule size, or see more physics lab equipment.

Frequently Asked Questions

How do I know the membrane needs replacing?

The manometer reading creeps back while the capsule is held at a fixed depth, bubbles rise from the capsule, the readings fall well short of the depth, or the rubber feels sticky or cracked.

How tight should a new membrane be?

Just tight enough to remove wrinkles. A drum-tight membrane carries part of the pressure in its own tension, so the manometer under-reads; a slack one follows small pressures more faithfully.

How can I check for leaks after fitting?

Press the membrane gently with a fingertip. The manometer level should rise and stay put while you hold, then return when you let go; a level that slowly falls back points to a leak at the rim or in the tubing.

How should spare membranes be stored?

In a closed bag or box, cool and away from sunlight, electric motors and oils, all of which age rubber. Stored that way they stay supple far longer than membranes left on the bench.

Will the membranes fit my existing capsule?

The membrane must suit the capsule rim, so the diameter and material can be confirmed at enquiry. Measure the outer diameter of your capsule face before ordering.

Why does a new membrane give slightly different readings from the old one?

A fresh membrane is more flexible, so less of the pressure goes into stretching it and the readings come closer to the true depth. Repeat any comparison runs after replacing it.

Last Updated: October 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
USD United States (US) dollar
Product has been added to your cart
Compare (0)