Search

In Stock

Pressure Capsule

Capsule manométrique, Precision Air-Tight Hose Interface enables the evaluation of simple and economical pneumatic signal transmission for integration with Marey’s drum or manometric flame assemblies, reinforcing evidentiary-grade laboratory reporting.

Low-Volume Displacement Basin supports the Application of Bernoulli’s principle in high-frequency pressure-oscillation studies, ensuring accurate student observation of transient wave phenomena.

₹956.00

Quick Answer: The pressure capsule is a small, shallow cup closed by a thin elastic membrane and connected by tubing to a manometer. Lowered into a tank of liquid, the pressure capsule shows how pressure increases with depth and that, at one depth, it is the same whichever way the membrane faces.

Pressure Rises with Depth

Liquid pressing on the membrane pushes it inwards slightly, compressing the air in the capsule and tubing, and the manometer at the other end of the tube shows that pressure as a difference in liquid levels. Pressure in a liquid follows p = ρgh, so in water each centimetre of depth adds about 98 Pa and every 10 cm adds close to 1 kPa. A graph of manometer reading against depth is a straight line through the origin.

With a water-filled manometer the level difference ideally matches the depth of the membrane. In practice it reads a little lower, because part of the pressure is carried by tension in the membrane as it bulges inward. Repeating the series in strong salt solution gives a steeper line, which brings density into the discussion.

The Same Pressure in Every Direction

Hold the capsule at a fixed depth and turn it so the membrane faces up, sideways and then down. The manometer reading stays the same, which is the key observation that pressure at a point in a fluid acts equally in all directions. The membrane’s centre must stay at the same depth while it is turned; otherwise the change in depth alone alters the reading.

The capsule also serves as the sensing end for other experiments, for example measuring the pressure at the base of vessels of different shapes filled to the same height, where the reading depends only on the depth of liquid.

Demonstrations

  • Showing that liquid pressure increases with depth
  • Showing that pressure at one depth acts equally in all directions
  • Comparing liquids of different density at the same depth
  • Measuring pressure at the base of differently shaped vessels

Specifications

Product Manometric pressure capsule (membrane probe)
Sensing element Thin elastic membrane over a shallow cup
Read with Water U-tube manometer, dial gauge or pressure sensor, via tubing
Relation shown p = ρgh
Membrane diameter, tube connection and mounting Confirm at enquiry

Care & Handling

  • Replace the membrane when it sags, splits or turns sticky
  • Keep fingers and sharp objects off the membrane
  • Rinse in clean water after use in salt solution and let it dry
  • Keep the connecting tube free of kinks and water plugs

Why Choose LabEquip

Teachers demonstrating liquid pressure need a probe the whole class can follow, and a pressure capsule with a coloured-water manometer does that. Keep replacement membranes on hand and read the pressure with a U-tube manometer; contact LabEquip for supply, or browse more physics lab equipment.

Frequently Asked Questions

How much does the pressure increase per centimetre of water depth?

About 98 Pa for every centimetre, or close to 1 kPa for every 10 cm, from p = ρgh with the density of water taken as 1000 kg/m³.

Why is the manometer reading a little less than the depth of the capsule?

Part of the outside pressure is carried by the tension in the membrane as it bulges inwards. A slack, fresh membrane and a small volume of air in the tubing keep that difference small.

Why must the membrane stay at the same depth when the capsule is turned?

Because pressure depends on depth. If turning the capsule raises or lowers the membrane, the reading changes for that reason alone and hides the result that pressure at one depth is the same in all directions.

Can the capsule be used with liquids other than water?

Yes, with liquids that do not attack the membrane or tubing. A denser liquid such as strong salt solution gives a larger reading at the same depth, which shows the role of density in p = ρgh.

Can a pressure sensor be used instead of a manometer?

Yes. Connecting the capsule’s tube to a pressure sensor or dial gauge gives a direct reading in pascals, which is convenient for plotting pressure against depth with a data logger.

How often does the membrane need replacing?

Whenever it sags, splits, becomes sticky or no longer springs back after being pressed. Rubber ages with light and ozone even in storage, so a spare membrane is worth keeping.

Last Updated: October 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
INR Indian rupee
Product has been added to your cart
Compare (0)