Search

In Stock

Power Supply Unit 12 V 5 A

Bloc alimentation à découpage 12 V 5 A Engineered with high-efficiency switching circuitry that minimizes internal thermal dissipation, maintaining a stable 60W output even under sustained 5A peak inductive loads.

EMI/RFI Suppression Filtering Features a multi-stage input filter to mitigate electromagnetic interference, ensuring clean power delivery and signal integrity for sensitive oscilloscope-based measurements and high-fidelity data acquisition systems.

₹1,230.00

Quick Answer: The 12 V 5 A power supply unit is a desktop adapter that converts mains electricity into a 12 V DC output able to deliver currents up to 5 A, that is up to 60 W. It powers 12 V motors, lamps, LED strips, fans and electronic projects on the lab bench.

What 12 V and 5 A Actually Mean

The two figures in the title describe different things. 12 V is the output voltage the unit holds steady. 5 A is the largest current it can supply continuously, not a current it forces through whatever is connected. A load draws the current its own resistance and design require: a 12 V lamp drawing half an amp takes half an amp, and the remaining capacity simply goes unused. Students often expect a 5 A supply to push 5 A through a small component, so this point is worth making explicitly.

Multiplying the two figures gives the power limit of 60 W. Loads added in parallel add their currents, and the total must stay within 5 A. A motor that stalls, or a short circuit, will try to draw more, and a supply of this type normally responds by limiting or shutting down its output until the fault is removed.

Inside a Switch-Mode Adapter

The adapter in the product photograph is the compact brick style used for many electronic devices, with a mains lead on one side and a DC lead on the other. Units like this are usually switch-mode supplies: they rectify the mains, switch it at high frequency through a small transformer, then rectify and smooth the result while a feedback circuit holds the output at 12 V. Switching at high frequency is what lets the transformer be so much smaller and lighter than the iron-cored transformer in an older linear supply, a point students can feel by comparing the weight of the two.

Applications

  • Powering a 12V motor on a bracket and other 12 V motors in energy and mechanics practicals
  • Supplying LED strips, fans and Peltier modules in student STEM projects
  • Driving 12 V lamps and electromagnets on the bench
  • Comparing switch-mode and transformer-based supplies in lessons on electrical power

Specifications

Product Power supply unit, desktop adapter type
Output voltage 12 V DC, as titled
Maximum output current 5 A, as titled (up to 60 W)
Form in the photograph Adapter brick with mains lead and DC output lead
Typical loads 12 V motors, lamps, LED strips, fans, electromagnets
Output connector and polarity Confirm at enquiry

Care & Handling

  • Check the output connector polarity before connecting polarity-sensitive loads
  • Keep the total load within 5 A and allow airflow around the adapter, which warms in use
  • Do not short the output leads; switch off and disconnect before changing circuit wiring
  • Inspect the mains lead and DC lead for damage and keep the unit dry

Why Choose LabEquip

The 12 V 5 A power supply suits schools and colleges running motor, lighting and STEM project work that needs more current than small plug-in adapters provide. For lighter loads the 12V 600 mA switching supply may be enough; LabEquip can advise on either through our contact page, and related items are listed under physics lab equipment.

Frequently Asked Questions

Will a 5 A supply damage a component that needs less current?

No, as long as the voltage is right. The component draws only the current it needs at 12 V. The 5 A figure is the most the unit can provide, so it simply has spare capacity.

Can it charge batteries?

It is a fixed-voltage supply, not a charger, and has no charging control. Batteries should be charged with a charger designed for their chemistry.

What happens if the output is short-circuited?

Supplies of this type normally limit the current or shut down until the short is removed, but a short still stresses the unit and can heat thin wiring. Switch off before changing connections and avoid shorting the leads.

Can several loads be run at once?

Yes, connected in parallel across the output, provided their currents add up to no more than 5 A. Staying a margin below the maximum keeps the adapter cooler.

Is the output safe to touch?

12 V DC is an extra-low voltage and does not give a shock in normal dry conditions, but high currents can heat thin wires and short-circuited leads quickly. The mains side of the adapter must never be opened.

Why is it lighter than an older bench power supply?

It is a switch-mode design: switching at high frequency allows a much smaller transformer than the heavy iron-cored transformer of a linear supply. The trade-off is a little high-frequency ripple on the output, which rarely matters for motors and lamps.

Last Updated: October 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
INR Indian rupee
Product has been added to your cart
Compare (0)