Quick Answer: The Planck constant model is a bench apparatus for estimating Planck’s constant h from light-emitting diodes (LEDs) of different colours. Students find the voltage at which each LED just starts to emit light and relate it to the energy of the photons it produces.
Electrical Energy Becomes a Photon
In an LED, each electron that crosses the junction and recombines can release its energy as a single photon. The photon energy is roughly equal to the band gap of the semiconductor, and the voltage needed before the LED begins to conduct and glow is roughly that energy divided by the electron charge. Setting eV equal to hc/λ links the measured threshold voltage V to the wavelength λ of the emitted light.
Different colours come from semiconductors with different band gaps. A red LED switches on at a lower voltage than a green one, and a blue LED needs more still. Plotting threshold voltage against 1/λ for several LEDs gives a straight line whose gradient is hc/e, from which h follows.
Getting a Sensible Result
The difficulty lies in deciding the threshold. One method is to raise the voltage slowly in a darkened room and note when the first glow appears, viewed through a tube to exclude stray light. Another is to plot current against voltage and extend the steep straight part of the curve back to the voltage axis. The second is more objective and should be used where the model allows current readings.
Results usually land close to, but not exactly on, the accepted value of 6.63 × 10⁻³⁴ J s. The difference is not only experimental error: LED light covers a band of wavelengths, and junction voltages are not exactly equal to the photon energy. Discussing why the method agrees as well as it does is a valuable part of the practical.
Specifications
| Product | Planck constant apparatus (model) for practical work |
| Method | Threshold voltage of LEDs of different colours |
| Key relation | eV ≈ hc/λ, so V against 1/λ has gradient hc/e |
| Measurements | LED threshold voltage and emission wavelength |
| Number of LEDs, their wavelengths and meters supplied | Confirm at enquiry |
Learning Outcomes
- Estimating Planck’s constant in an introductory quantum physics practical
- Showing the link between photon energy and the colour of light
- Introducing semiconductor band gaps with LEDs students already know
- Comparing with the photoelectric method of finding h
Care & Handling
- Raise the voltage slowly and keep the LED current within the limit set by the apparatus so the diodes are not burnt out
- Do not look directly into bright LEDs, particularly blue or violet ones, at close range
- Switch off before moving leads between LEDs where the model requires it
- Keep the unit dry and store it with its leads tidy
Why Choose LabEquip
The Planck constant model appeals to schools and colleges that want a quick, low-cost route to h before students meet the photoelectric effect. Departments with a larger budget often add the Planck’s constant by photoelectric effect apparatus for comparison; contact LabEquip for details, or explore more physics lab equipment.
Frequently Asked Questions
How does an LED give a value for Planck’s constant?
At the threshold voltage, the energy given to each electron, eV, is roughly the energy of one emitted photon, hc/λ. Measuring V for LEDs of known wavelength and plotting V against 1/λ gives a gradient of hc/e.
Why does a blue LED need a higher voltage than a red one?
Blue light has a shorter wavelength and so more energy per photon. The semiconductor in a blue LED has a wider band gap, so a larger voltage is needed before it emits.
What is the most reliable way to find the threshold voltage?
Plot current against voltage and extend the steep, straight part of the curve back to zero current. The voltage where it meets the axis is less subjective than judging the first faint glow by eye.
Why is the result not exactly the accepted value?
LED light covers a spread of wavelengths and the junction voltage is not exactly equal to the photon energy. These effects cause a systematic difference, which is worth discussing rather than hiding.
How does this compare with the photoelectric method?
The photoelectric method measures the stopping voltage of electrons released from a metal surface by light and follows Einstein’s original analysis. The LED method is quicker and simpler, while the photoelectric apparatus generally gives a closer result.
Is the apparatus suitable for school students?
Yes. The method uses familiar components and the graph is easy to understand. Older students can go further and analyse the systematic errors in depth.
Last Updated: October 2026










Reviews
There are no reviews yet.