Quick Answer: The Mirrors, Concave are spherical mirrors whose reflecting surface curves inwards like the inside of a bowl, used in physics practicals to converge light and form real and virtual images. A concave mirror has a focal length equal to half its radius of curvature.
How a Curved-in Mirror Converges Light
Rays parallel to the principal axis reflect from the inward-curving surface and pass through a point in front of it, the principal focus F. For a spherical mirror of small aperture, the focal length is half the radius of curvature, f = R/2, a result students can test by measuring R with a spherometer and comparing it with the focal length found optically.
The images follow a pattern much like that of a converging lens. With the object beyond the centre of curvature C, the image is real, inverted and smaller, between F and C. At C the image is real, inverted, the same size and also at C. Between C and F it is real, inverted, enlarged and beyond C. Inside F the reflected rays diverge and the image is virtual, upright and enlarged behind the mirror, which is why such mirrors serve for shaving and make-up.
The mirror formula, 1/v + 1/u = 1/f in the Cartesian convention, connects object and image distances, and magnification is m = −v/u. Wide spherical mirrors do not bring all rays to exactly one point; this spherical aberration is why searchlights and telescope mirrors use parabolic surfaces.
Finding the Focal Length
The rough method needs only a screen: stand the mirror facing a distant window and move a white card in front of it until a sharp, inverted image of the window appears; the distance from mirror to card approximates f. The more accurate method uses an optical bench and an object pin. Move the pin until it coincides with its own inverted image without parallax; the pin is then at C, and f is half that distance. Several u–v pairs plotted as 1/v against 1/u refine the value.
Practical Work
- Finding focal length by the distant object and no-parallax pin methods
- Verifying the mirror formula and measuring magnification
- Projecting real images on a screen and viewing enlarged virtual images
- Explaining reflectors in torches, headlights and solar cookers
Specifications
| Type | Spherical mirror, concave (converging) |
| Key relations | f = R/2; 1/v + 1/u = 1/f |
| Images | Real and inverted beyond F; virtual and enlarged inside F |
| Used with | Optical bench, mirror holder, pins or screen |
| Focal lengths, diameter and mounting | Confirm at enquiry |
Care & Handling
- Point the mirror away from the Sun and never leave it on a sunny window sill; it can focus sunlight hot enough to burn.
- Clean the reflecting face with a soft, damp cloth and dry it gently; abrasive cleaners dull the surface.
- Store mirrors face up or in padded slots so the reflecting surface touches nothing.
- Check the back coating for flaking and keep mirrors dry.
Why Choose LabEquip
Concave mirrors appear in practical syllabuses from secondary school to first-year college, so physics departments buy them in sets of matching focal length for group work. LabEquip lists them alongside the convex mirrors in Physics Equipments; the contact page is the place to ask about focal lengths and mounts.
Frequently Asked Questions
How do I quickly find the focal length of a concave mirror?
Face the mirror towards a distant window and move a white card in front of it until a sharp, inverted image appears. The distance from mirror to card is approximately the focal length.
Why is the focal length half the radius of curvature?
A ray parallel to the axis is reflected at the same angle to the radius at the point where it strikes. For rays close to the axis, simple geometry shows they cross the axis halfway between the mirror and the centre of curvature.
When does a curved-in mirror form a virtual image?
Only when the object is closer than the focal point. The reflected rays then diverge, and the eye sees an upright, enlarged image behind the mirror, as in a shaving mirror.
What sign convention applies?
In the Cartesian convention, distances measured against the direction of the incident light are negative, so this mirror’s focal length is negative and the formula reads 1/v + 1/u = 1/f.
Why are the real images inverted?
Rays from the top of the object cross the axis after reflection and meet below it, while rays from the bottom meet above. The crossing turns the image upside down.
Can the mirror be used to show how a solar cooker works?
Yes, on a small scale: sunlight converges at the focus and heats a small dark object placed there. The focused spot is hot enough to burn, so handle it with care and never look at the reflected sunlight.
Last Updated: October 2026










Reviews
There are no reviews yet.