Quick Answer: The Spherometer-Disc Type is a three-legged measuring instrument with a central micrometer screw carrying a graduated circular disc, used with a plane glass plate to find the radius of curvature of a lens or curved mirror. A disc type spherometer reads the small height of a curved surface above the plane of its three legs.
From a Small Height to a Radius
The three fixed legs sit at the corners of an equilateral triangle. When they rest on a curved surface, the central screw must be raised or lowered by a small height h before its tip just touches the surface. If l is the distance between any two legs, the radius of curvature is R = l²/6h + h/2. Because h is tiny, the fine reading of the screw is what makes the result usable.
The screw moves beside a vertical scale graduated in millimetres, and the disc turns past the edge of that scale. Pitch is found by turning the disc through a whole number of rotations and noting the distance moved on the vertical scale; least count is pitch divided by the number of disc divisions. Pitch and division count vary between instruments, so take them from the one in use.
Procedure: stand the spherometer on a plane glass plate, turn the screw until its tip just touches and record the reading; move it to the lens, raise the screw and turn it back down until it just touches, counting complete rotations; h is the difference. Contact is judged when the instrument begins to rock, or when the tip meets its own reflection. To find l, press the legs onto paper and measure between the marks with a vernier caliper. A double disc spherometer is listed as an alternative pattern.
Specifications
| Legs | Three fixed legs forming an equilateral triangle |
| Screw | Central micrometer screw with a pointed tip |
| Scales | Vertical millimetre scale and graduated circular disc |
| Used with | Plane glass plate as the reference surface |
| Pitch, disc divisions and leg spacing | Confirm at enquiry |
Applications
- Finding the radius of curvature of a convex or concave lens surface
- Measuring the radius of curvature of a spherical mirror
- Measuring the thickness of a thin glass plate by the difference in screw readings
- Teaching the screw principle in senior secondary optics practicals
Care & Handling
- Lower the screw gently; forcing the tip onto glass can scratch the lens or dull the point.
- Use a clean, flat glass plate for the zero reading and keep the legs free of grit.
- Store the spherometer in its box with the screw raised so the tip rests on nothing.
- A drop of light oil on the thread keeps the disc turning smoothly; wipe away any excess.
Why Choose LabEquip
Senior secondary schools and colleges running optics practicals keep spherometers alongside their lenses and mirrors. LabEquip lists this model in the General Lab Products range; share the number of optics benches you are equipping via the contact page.
Frequently Asked Questions
What formula gives the radius of curvature?
R = l²/6h + h/2, where l is the distance between two legs and h is the height of the surface above or below the plane of the legs. When h is very small compared with l, the second term is often neglected.
How do I find the least count?
Turn the disc through a few complete rotations and note the distance travelled on the vertical scale; dividing by the number of rotations gives the pitch. Divide the pitch by the number of disc divisions to get the least count.
How do I know when the screw tip just touches the surface?
Lower it slowly while pressing lightly on the frame. At contact the instrument starts to rock about the tip, and on glass the tip and its reflected image meet. Stop turning at that point.
Can it measure concave surfaces?
Yes. On a concave surface the screw tip sits below the plane of the legs instead of above it, but the same h and the same formula give the radius.
How is the leg spacing measured?
Press the three legs lightly onto a sheet of paper to leave marks, then measure the distance between each pair of marks and take the mean. A vernier caliper gives more precise values than a ruler.
Why is the glass plate reading taken first?
The plate provides a flat reference. Its reading is the zero from which the height of the lens surface is measured, so it corrects for any offset in the screw and scale.
Last Updated: September 2026










Reviews
There are no reviews yet.