Search

In Stock

Buzzers 6 V

Precision 6V DC Actuation: Engineered for stable acoustic resonance at a nominal 6V input, ensuring consistent sound pressure levels (dB) across varied laboratory power supply configurations and breadboard setups.

High-Durability Piezoelectric Core: Utilizes a solid-state piezoelectric transducer with low current consumption, facilitating long-term operational stability and rapid frequency response in high-cadence educational prototyping and signal logic testing.

₹145.00

Quick Answer: Buzzers 6 V are small electrical sounders rated for a 6 V supply, for building into student circuits as audible indicators. A 6 V buzzer gives a clear tone from four dry cells or a low-voltage supply, which makes it a staple of alarm, continuity and logic-indicator circuits in school electricity.

What the 6 V Rating Means

A buzzer’s voltage rating is the supply at which it is designed to sound properly without overheating. Run below it, a self-drive buzzer gets quieter and may eventually stop; run well above it, the drive circuit and sounding element are stressed. A 6 V rating fits neatly with school sources: four standard dry cells in series, a 6 V battery or the 6 V setting of a laboratory low-voltage supply.

The rating applies to the voltage across the buzzer itself. In a series circuit with a lamp or resistor the supply voltage is shared, so the buzzer may receive much less than 6 V and sound weakly, a handy real example when students are learning how voltage divides in series. Placed in parallel with other components, it receives the full supply voltage.

Applications

  • Alarm circuits switched by push buttons, reed switches or sensors
  • Audible output for timer circuits and logic-gate practicals
  • Continuity testers and steady-hand games
  • Practice with ammeters and voltmeters on a low-power load

Measuring the Buzzer as a Load

Because it draws a modest, steady current at its rated voltage, the buzzer makes a convenient load for meter practice. With an ammeter in series and a voltmeter across it, students can work out the electrical power it takes as voltage times current and compare it with a torch bulb, which usually draws a good deal more. The comparison explains why buzzers rather than lamps are chosen for battery alarms that must wait, ready, for a long time.

Specifications

Component Electrical buzzer
Rated voltage 6 V (as titled)
Supply Direct current; observe polarity
Use Audible indicator in student circuits
Mounting, element type and current Confirm at enquiry

Care & Handling

  • Connect each 6 V buzzer with the correct polarity and at or near its rated voltage.
  • Check the setting of a variable laboratory supply before switching on, so the buzzer is not fed well above 6 V.
  • Keep the sound openings clear and the leads free of strain.
  • Switch circuits off when not in use to save cells and avoid continuous noise.

Why Choose LabEquip

Schools buy 6 V buzzers in sets so that every group can build its own alarm or indicator circuit. LabEquip supplies them within our physics lab equipment range, along with the buzzer on support for younger classes who wire with plug leads; send quantities through the contact page.

Frequently Asked Questions

Will a 6 V buzzer work on a 4.5 V supply?

Usually it will sound, but more quietly, because a lower voltage drives less current through it. Below a certain voltage a self-drive buzzer may stop altogether. For full volume use a supply close to 6 V.

Why does the buzzer sound weakly in series with a lamp?

In series the supply voltage is shared between the components. The lamp takes part of it, so the buzzer receives less than its rated voltage. Connecting the buzzer in parallel with the lamp instead gives it the full supply voltage.

How do I connect the buzzer the right way round?

Look for a plus sign or a red lead, which marks the positive connection, and connect it to the positive side of the supply. A polarised buzzer connected the wrong way round simply stays silent, so reversing the leads is the first thing to try.

How much current does a buzzer draw?

Small indicator buzzers draw much less current than a torch bulb, which is why they suit battery-powered alarms. The figure for these buzzers can be measured directly with an ammeter in series, a useful exercise in itself.

Can a 6 V buzzer be driven by a logic gate or timer?

Yes, if the output can supply the buzzer’s current at a suitable voltage. Many school logic and timer circuits run near 6 V and can drive a small buzzer directly; otherwise a transistor is added as a switch so that the output only has to supply a small base current.

Why are buzzers used in battery alarms instead of bells?

A buzzer draws far less current than an electromagnetic bell and has no hammer to wear, so a battery lasts much longer in a circuit that may wait for weeks. A bell is louder and is chosen when the alarm must be heard over a wide area.

Last Updated: October 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
INR Indian rupee
Product has been added to your cart
Compare (0)