Search

In Stock

Masses (Weights) Set, Steel, Hooked, Painted

Industrial-Grade Enamel Finish: Features a specialized baked-on protective coating designed to resist chemical corrosion and mechanical chipping, ensuring long-term mass stability and protection against oxidation in high-humidity laboratory environments.

Axial-Aligned Hook Geometry: Engineered with high-tensile integrated hooks that allow for secure vertical cascading and stable center-of-gravity alignment during dynamic pulley experiments or high-capacity tensile stress testing.

₹1,680.00

Quick Answer: The Masses (Weights) Set, Steel, Hooked, Painted is a set of hooked steel masses protected by a painted finish, an economical choice for class sets. A hooked steel masses set suits dynamics practicals in which a hanging load, tied over a pulley, accelerates a trolley or another mass.

Newton’s Second Law with a Hanging Mass

In the standard practical a dynamics trolley on a level runway is tied to a string that passes over a bench pulley to a hooked mass. When the mass is released, its weight accelerates both itself and the trolley. Timing the motion with light gates, a ticker timer or video gives the acceleration, and the accelerating force is the weight of the hanging mass.

To show that acceleration is proportional to force, the total mass being accelerated must stay the same. Students therefore start with several masses resting on the trolley and move them one at a time to the hanging position. Each transfer increases the force without changing the total mass, and a graph of acceleration against force is a straight line whose gradient is one divided by the total mass. A slight slope on the runway is set first to compensate for friction.

Paint as a Protective Finish

Painting is a practical, low-cost way to protect steel from rust. The paint layer has a small mass of its own, which is part of each piece’s mass as supplied, so it does not affect results while it stays intact. Chips expose bare steel to moisture; small chips matter little in class practicals, but a badly damaged piece should be checked on a balance and replaced if its mass has changed.

Applications

  • Accelerating a trolley with a hanging load to verify F = ma
  • Atwood machine setups comparing two hanging loads over a pulley
  • Loads for pulley systems and string-tension practicals
  • Large class sets where budget favours a painted finish

Specifications

Set type Hooked masses
Material Steel
Finish Painted
Fitting Hook on each piece for hanging from string or other hooks
Masses included and colours Confirm at enquiry

Care & Handling

  • Place a soft pad or catch box under the hanging load in pulley practicals so a released mass does not strike the floor.
  • Avoid knocking pieces together, because chipped paint exposes the steel to rust.
  • Dry the hooked steel masses set after use in humid rooms and store it in a closed box.
  • Take any piece with heavy rust or damage out of accurate work until its mass has been rechecked.

Why Choose LabEquip

Schools equipping many dynamics benches often pick painted hooked sets to stretch the budget without losing function. LabEquip supplies this set from its Physics Equipments range, and the plastic dynamic trolley completes the Newton’s second law setup. For quantities, write via the contact page.

Frequently Asked Questions

Why move masses from the trolley to the hanger instead of adding new ones?

The acceleration depends on the force and on the total mass being moved. Moving a mass from trolley to hanger raises the force while keeping the total mass constant, so only one variable changes.

What is an Atwood machine?

Two masses connected by a string over a light pulley. The heavier one falls and the lighter one rises with an acceleration equal to g multiplied by the difference of the masses divided by their sum, so small differences give slow, measurable motion.

Does the paint affect the mass?

The paint is part of each piece as supplied, so it is included in the mass that piece represents. Trouble arises only if paint flakes away in quantity, which is why damaged pieces should be rechecked.

Painted or chrome plated: which should I choose?

Both protect steel from rust. Chrome plating is harder wearing and easier to clean; paint is the more economical finish for large class sets. For most school practicals the two perform the same.

How do I compensate for friction on the runway?

Tilt the runway slightly until a gentle push sends the trolley along at steady speed. The component of its weight down the slope then balances friction, and the hanging mass provides the whole accelerating force.

Why is the string tension less than the hanging weight?

While the system accelerates, the hanging mass is not in equilibrium: its weight must exceed the tension for it to speed up. The tension equals the weight only when the mass hangs at rest or moves at constant speed.

Last Updated: October 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
INR Indian rupee
Product has been added to your cart
Compare (0)