Search

In Stock

Masses (Weights), Hooked, Brass

Non-Magnetic Alloy Composition: Precision-machined from high-density, non-magnetic brass to prevent electromagnetic interference during sensitive force determination experiments in high-EMI laboratory settings.

Axial-Aligned Dual Hooks: Features integrated top and bottom hooks engineered for stable vertical cascading, allowing for accurate additive loading without shifting the center of gravity during mechanical stress tests.

$20.53

Quick Answer: The Masses (Weights), Hooked, Brass are brass masses each fitted with a hook, so they hang directly from a spring balance, string or lever. Hooked brass masses are a natural choice for Archimedes’ principle practicals, because brass does not rust when it is lowered into water.

Upthrust and Archimedes’ Principle

A hooked brass mass is hung from a spring balance and its weight in air recorded. It is then lowered, still hanging, into water in an overflow can until it is fully submerged, and the new, smaller reading is taken. The difference between the two readings is the upthrust. The water pushed out of the can is caught and weighed; Archimedes’ principle predicts that its weight equals the upthrust, and with careful technique the two agree closely.

Repeating the measurement in salt water gives a larger upthrust, because the denser liquid displaced by the same volume weighs more. Lowering the mass only halfway shows upthrust growing with the volume submerged, and then staying constant once the mass is completely under the surface, whatever its depth.

Relative Density from Two Readings

The same two readings give the relative density of brass: weight in air divided by the loss of weight in water, because that loss equals the weight of an equal volume of water. Students can compare their figure with published values for brass and with results for steel or aluminium masses tested in the same way.

Experiments

  • Archimedes’ principle with a spring balance and overflow can
  • Relative density of a solid by weighing in air and in water
  • Comparing upthrust in fresh and salt water
  • Hanging loads on spring balances, levers and pulleys

Specifications

Type Hooked masses
Material Brass
Fitting Hook for hanging from a balance, string or lever
Suited to Immersion in water during upthrust experiments
Masses available and number per set Confirm at enquiry

Care & Handling

  • Dry hooked brass masses thoroughly after immersion experiments and before storage.
  • Rinse off salt solutions with fresh water afterwards to avoid surface staining.
  • Lower masses gently into the water so the spring balance is not jerked.
  • Store them in a box, not loose in a drawer, so the hooks do not bend.

Why Choose LabEquip

Science departments buy hooked brass masses for Archimedes and density practicals that would leave iron masses rusting. LabEquip supplies them from its Physics Equipments range, and the metal overflow vessel (eureka can) completes the upthrust setup. Ask about masses and quantities via the contact page.

Frequently Asked Questions

Why does the spring balance reading fall when the mass is in water?

The water pushes up on the submerged mass with a force called upthrust. The balance now supports only the weight minus the upthrust, so it reads less. The mass itself has not changed.

How does upthrust relate to the displaced water?

Archimedes’ principle states that upthrust equals the weight of fluid displaced. Catching the overflow from a full can and weighing it lets students check this directly.

How is relative density found with a hooked mass?

Divide the weight in air by the loss of weight in water. The loss equals the weight of an equal volume of water, so the ratio tells how many times denser the solid is than water.

Why use brass rather than steel for this practical?

Brass resists corrosion in water, so repeated immersion does not leave rust that would change the mass. It is also dense enough to sink completely, which the method requires.

Does depth change the upthrust?

Not once the mass is fully submerged. Upthrust depends on the volume displaced and the density of the liquid, so moving a fully submerged mass deeper leaves the reading unchanged.

Can these masses hang from each other?

Only if each piece has a loop or eye below as well as a hook above. Single-hook masses hang one per support; for chains of masses, double-sided hooked masses are made for that purpose.

Last Updated: October 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
USD United States (US) dollar
Product has been added to your cart
Compare (0)