Search

In Stock

Kit of Strong Levitation Force

Kit de force de lévitation forte, 0.1 kg High-Mass Levitation Stability Supports the Creation of complex mechanics experiments involving frictionless movement and rotational inertia in a quantum-locked state.

Cryogenic Safety Handling Array Develops the student’s ability to apply safety protocols for high-risk cryogenic material handling within a controlled institutional laboratory setting.

$18.27

Quick Answer: The strong levitation force kit demonstrates superconducting levitation, in which a high-temperature superconductor cooled with liquid nitrogen holds a permanent magnet floating above it or hanging below it. The kit is aimed at showing that the levitation force is strong and stable, not merely a delicate floating effect.

Why the Force Is Strong and Stable

A superconductor cooled below its critical temperature expels magnetic field from its interior, the Meissner effect, which pushes a magnet away. In the ceramic superconductors used for demonstrations, part of the field also penetrates in thin tubes called flux vortices, which become trapped at defects in the material. This flux pinning holds the magnet at a fixed position in three dimensions, so it resists being pushed up, down or sideways.

Pinning is what makes strong levitation possible. A magnet held by pinning can be turned upside down with the superconductor and stay suspended underneath, and a pinned arrangement can carry a modest load without collapsing. A material showing only the Meissner effect would push the magnet away but could not hold it in place.

Demonstrations with the Kit

Cooling the superconductor with the magnet already resting on spacers above it, called field cooling, freezes in the field at that height, so the magnet stays at that gap when the spacers are removed. Pushing the magnet closer and releasing it shows a springy restoring force; lifting it away shows that the superconductor is drawn after it. Turning the assembly over shows suspension below the superconductor.

Where the kit allows, gently loading the levitated element shows how the gap shrinks as the force increases, a qualitative way to discuss levitation stiffness. As the superconductor warms above its critical temperature the pinning fails and the magnet drops, a clear end to the demonstration.

Specifications

Product Superconducting levitation kit for strong levitation force demonstrations
Principle Meissner effect and flux pinning in a high-temperature superconductor
Coolant needed Liquid nitrogen
Demonstrations Levitation, suspension below the superconductor, restoring force
Superconductor, magnet and accessory details Confirm at enquiry

Demonstrations

  • Lecture demonstrations of superconductivity and flux pinning
  • Comparing field-cooled and zero-field-cooled levitation
  • Introducing maglev transport and superconducting bearings
  • Outreach events where a visibly strong levitation holds the audience’s attention

Care & Handling

  • Handle liquid nitrogen with insulated gloves and eye protection, in a well-ventilated room, and never in a sealed container
  • Let the superconductor warm up and dry fully after use, because condensation can damage ceramic superconductors over time
  • Keep strong magnets away from electronics, cards and each other, and beware of pinched fingers
  • Handle the superconductor gently, as ceramic samples are brittle and chip if dropped

Why Choose LabEquip

Universities, colleges and science centres choose this kit when a demonstration must convince a large audience. It can be combined with the YBCO levitation disk and the superconducting wire for a complete superconductivity lesson; contact LabEquip to confirm the contents.

Frequently Asked Questions

What is the difference between the Meissner effect and flux pinning?

The Meissner effect is the expulsion of magnetic field from a superconductor, which pushes a magnet away. Flux pinning traps part of the field at defects, which locks the magnet in position and gives strong, stable levitation.

Why can the magnet hang underneath the superconductor?

Flux pinning resists movement in every direction, including downwards. Once the field is pinned, the magnet keeps its position relative to the superconductor even when the assembly is turned over.

What is field cooling?

Cooling the superconductor while the magnet is held at the desired height. The field present at that moment is pinned, so the magnet stays at that gap after the support is removed.

How long does the levitation last?

As long as the superconductor stays below its critical temperature. Once the liquid nitrogen has boiled away and the sample warms, the pinning fails and the magnet settles.

What precautions does liquid nitrogen need in demonstrations?

Trained staff should handle it wearing insulated gloves and eye protection, in a ventilated room, using open insulated containers. Never seal liquid nitrogen in a closed vessel, which can burst as it boils.

Where is superconducting levitation used outside the lab?

The same principles are applied in experimental maglev vehicles, superconducting bearings and flywheel energy storage. The kit shows on a small scale why pinning makes these designs stable.

Last Updated: October 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
USD United States (US) dollar
Product has been added to your cart
Compare (0)