Search

In Stock

Jet Carts

Chariots à réaction (Lot de 6), Étude des mouvements à accélération constante enables the technical evaluation of momentum conservation by minimizing parasitic drag during high-cadence undergraduate research trials.

Modular Mass-Loading Surface Supports the physical Application of Newton's Second Law through standardized weight distribution across all six units.

Ruggedized Impact-Resistant Chassis Maintains experimental Consistency and reduces long-term total cost of ownership (TCO) in high-traffic vocational laboratory environments.

₹2,100.00

Quick Answer: Jet carts are wheeled carts propelled by a jet: the cart pushes a stream of air or gas out backwards, and the reaction force drives the cart forwards. Physics classes use jet carts to show Newton’s third law, the principle of rocket propulsion and the link between force and the rate of change of momentum.

Action, Reaction and Thrust

When a jet cart expels its jet, the cart exerts a backward force on the moving air or gas, and by Newton’s third law the jet exerts an equal and opposite forward force on the cart. The two forces act on different bodies, which is why they do not cancel. This is the same principle that drives a rocket, and it works without anything behind the cart to push against.

The size of the thrust depends on how much mass leaves each second and how fast it leaves: thrust = (mass flow rate) × (jet speed relative to the cart). A wider jet, or one pushed out faster, gives a larger force. While the jet runs, the cart’s forward momentum grows at the same rate as the backward momentum carried away by the jet.

Measuring the Motion of Jet Carts

Run the carts on a smooth, level bench or track and record their motion with a stopwatch over marked distances, a pair of light gates or a video clip. If the thrust is roughly steady, distance increases with the square of time, and the acceleration follows from s = ½at². Multiplying the acceleration by the cart’s mass gives the resultant force, which is the thrust less friction. Adding a known load to the cart and repeating shows that the acceleration falls as the mass rises, so the same set-up also tests Newton’s second law.

Specifications

Item Jet (reaction-propelled) carts
Principle Forward thrust from a backward jet; Newton’s third law
Quantities measured Distance, time and acceleration; thrust from F = ma
Used with Smooth bench or track, light gates, stopwatch or video
Propulsion source and number of carts Confirm at enquiry

Applications

  • Demonstrating action and reaction forces acting on different bodies
  • Modelling rocket propulsion and discussing why rockets work in space
  • Estimating thrust from the measured acceleration and the cart’s mass
  • Investigating how the load on the cart changes its acceleration

Care & Handling

  • Point the jet away from faces and keep the run area clear before releasing a cart.
  • Keep wheels and axles free of hair and fluff, which add friction and spoil timing results.
  • Stop the carts with a soft buffer at the end of the run rather than letting them strike a wall.
  • Store the carts dry and check any jet or nozzle parts for splits before each lesson.

Why Choose LabEquip

Science teachers choose jet carts when they want students to see a reaction force that keeps acting, rather than the single push of a spring-loaded trolley. LabEquip lists the carts in its physics lab equipment range, and a plastic dynamics trolley suits the comparison experiments. Ask through the contact page how the carts are propelled and how many come in a set.

Frequently Asked Questions

What makes a jet cart move forward?

The cart pushes a jet of air or gas backwards. By Newton’s third law the jet pushes back on the cart with an equal force in the opposite direction, and that forward force accelerates the cart.

Does the jet push against the air behind the cart?

No. This is a common misconception. The thrust comes from the reaction to throwing mass backwards, which is why rockets work in the vacuum of space where there is nothing to push against.

How can the thrust be estimated?

Measure the cart’s acceleration from distance and time, then multiply by its mass to get the resultant force. Adding the friction force, found by pushing the cart and timing how quickly it slows, gives an estimate of the thrust.

Why does a lighter cart accelerate more?

For the same thrust, acceleration equals force divided by mass. Halving the total mass roughly doubles the acceleration, which students can test by adding and removing loads.

Why does the speed stop rising before the jet runs out?

As the cart speeds up, friction and air resistance grow, and the thrust may fall as the pressure driving the jet drops. When the forward and backward forces become equal, the cart stops accelerating.

How is this different from a spring-loaded explosion between two trolleys?

A spring release gives one short impulse, after which the trolleys coast. A jet keeps pushing for as long as it runs, so the cart accelerates over a distance and the thrust can be measured as a steady force.

Last Updated: October 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
INR Indian rupee
Product has been added to your cart
Compare (0)