Search

In Stock

Jamin Interferometer

Fused Silica Jamin Plates: Features two matched, high-precision plane-parallel plates with λ/10 surface flatness, optimized for high-fidelity wavefront splitting and recombination across the visible spectrum.

Micrometer Compensator System: Integrated with a dual-plate Jamin compensator and a high-resolution micrometer screw, allowing for the fine adjustment of optical path differences with a precision of 0.01mm for sensitive fringe-shift analysis.

$27.64

Quick Answer: The Jamin Interferometer is an optical instrument that splits light into two parallel, well-separated beams using two thick glass plates and then recombines them to form interference fringes. Because the two beams travel along separate paths, a Jamin interferometer is used to measure the refractive index of gases by counting fringes as the gas pressure in one path changes.

Two Thick Plates, Two Parallel Beams

In the classic arrangement, two identical thick glass plates with silvered back surfaces face each other at a distance, almost parallel. Light striking the first plate is partly reflected at the front surface and partly refracted into the glass, reflected from the silvered back and sent out again, parallel to the first beam but displaced sideways. The two beams cross the space between the plates side by side, and the second plate recombines them by the same process in reverse, producing fringes seen through a telescope or on a screen.

Because the two paths are almost equal in length, fringes are easy to find, and tilting one plate very slightly sets their spacing. The exact optical layout, plates and accessories of this model should be confirmed at enquiry.

Measuring the Refractive Index of a Gas

Two identical tubes with glass end windows are placed one in each beam. Starting with both at the same pressure, gas is slowly let into one tube, or pumped out of it, while the observer counts the fringes that pass a reference mark. Each fringe means the optical path in that tube has changed by one wavelength, so for a tube of length L the change in refractive index is N times the wavelength divided by L. Plotting the fringe count against pressure gives a straight line, from which the refractive index of the gas at atmospheric pressure can be found. A monochromatic source, such as a sodium lamp or a He-Ne laser, makes the counting reliable.

Applications

  • Measuring the refractive index of air and other gases by fringe counting
  • Showing how optical path depends on pressure and temperature of a gas
  • Demonstrating interference with widely separated beams in advanced optics labs
  • Comparing two-beam interferometer designs with the Michelson arrangement

Specifications

Type Jamin two-plate interferometer
Principle Division of amplitude by thick plates into two parallel, separated beams
Main use Refractive index of gases and measurement of small path differences
Light source needed Monochromatic source, such as a sodium lamp or laser
Plates, gas tubes, compensator and mounting Confirm at enquiry

Care & Handling

  • Set the Jamin interferometer on a solid, vibration-free bench away from doors and fans.
  • Never touch the plate faces; remove dust with a blower and clean only with lens tissue.
  • Admit gas to the tubes slowly and never apply more than gentle pressure to their windows.
  • Cover the instrument when not in use and follow laser safety rules if a laser is the source.

Why Choose LabEquip

University and college physics departments buy a Jamin interferometer for advanced optics practicals in which students make precise measurements by counting fringes. LabEquip lists it with its physics lab equipment; the Fresnel biprism is a simpler interference experiment for earlier years. Discuss the configuration you need through the contact page.

Frequently Asked Questions

How does the Jamin interferometer split the light?

At the first thick plate, part of the light reflects from the front surface and part enters the glass, reflects from the silvered back and emerges displaced. This division of amplitude gives two parallel beams that are later recombined by the second plate.

Why is it useful that the two beams are well separated?

There is room to place a gas tube, a flame or another sample in one beam without disturbing the other. Any change in that path then shows up directly as a shift of the fringes.

How is the refractive index of air found?

Air is let slowly into an evacuated tube in one beam while the passing fringes are counted. The count multiplied by the wavelength and divided by the tube length gives the difference between the refractive index and one.

Why do the fringes move when gas enters the tube?

Adding gas increases the refractive index in that tube and lengthens its optical path. Each increase of one wavelength in path difference moves the pattern by one whole fringe.

Why is the instrument so sensitive to vibration and draughts?

A path change of a fraction of a wavelength shifts the fringes visibly. Tiny movements of the plates or temperature changes in the air along the beams are enough to disturb the pattern.

How does it differ from a Michelson interferometer?

A Michelson interferometer splits the light at a partly silvered plate into two perpendicular arms with mirrors. The Jamin design uses thick plates to give two parallel beams a fixed distance apart, which suits samples placed in long tubes.

Last Updated: October 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
USD United States (US) dollar
Product has been added to your cart
Compare (0)