Search

In Stock

Fusion Tube

Material Composition: Crafted exclusively from Borosilicate Glass 3.3, offering a low coefficient of thermal expansion (3.3 x 10-6 K-1) for superior thermal shock resistance compared to standard soda-lime alternatives.

Dimensional Precision: Standardized 75 mm length with a minimum 8 mm outer diameter (O.D.), featuring a rimless design to facilitate easy cleaning and uniform heating.

$1.86

Quick Answer: A Fusion Tube is a small glass ignition tube that is heated strongly in a flame to melt sodium metal with an organic compound in Lassaigne’s sodium fusion test. It is a single-use chemistry item, broken deliberately in water at the end of the fusion to prepare the extract used to test for nitrogen, sulfur and halogens.

What Happens in Lassaigne’s Test

Elements such as nitrogen, sulfur and the halogens are covalently bonded in organic compounds, so they do not give the usual ionic tests directly. Heating the compound with molten sodium converts them into ionic sodium salts: nitrogen (with carbon) into sodium cyanide, sulfur into sodium sulfide and halogens into sodium halides. These dissolve in water and can then be detected with ordinary reagents.

In the usual procedure, carried out or closely supervised by the teacher, a small piece of sodium is placed in the tube and heated until it melts, a little of the organic compound is added, and the tube is heated to red heat. The hot tube is then plunged into distilled water in a porcelain dish, where it shatters. The mixture is boiled, filtered and the clear filtrate, the sodium fusion extract, is divided into portions for the separate tests.

A Chemistry Consumable, Not Physics Apparatus

Although listed among physics items, this ignition tube belongs to the organic chemistry practical. Because every tube is broken during the test, they are bought in quantity as a consumable. They are smaller than ordinary test tubes and are made to be heated directly and strongly in a flame. The glass type, length and the number of tubes per pack should be confirmed when ordering.

Specifications

Type Small glass ignition (fusion) tube, single use
Main use Lassaigne’s sodium fusion test for N, S and halogens
Used with Sodium metal, tongs, burner, porcelain dish, distilled water, filter funnel
Level Senior school and undergraduate organic chemistry
Glass type, size and pack quantity Confirm at enquiry

Uses

  • Preparing the sodium fusion (Lassaigne’s) extract for qualitative organic analysis
  • Testing the extract for nitrogen (Prussian blue test), sulfur (sodium nitroprusside or lead acetate test) and halogens (silver nitrate test)
  • Heating very small quantities of solids strongly in a flame in other qualitative tests
  • Demonstrating the conversion of covalently bonded elements into ionic compounds

Care & Handling

  • Sodium reacts violently with water; it is stored under oil, cut and handled only with dry tongs and forceps, and the fusion is done by or under the direct supervision of the teacher.
  • Wear safety spectacles or a face shield, and plunge the hot tube into the water behind a safety screen, holding it at arm’s length with tongs.
  • Use only a small piece of sodium and destroy any unreacted sodium with alcohol before disposal, following the laboratory’s procedure.
  • Collect the broken glass in a dedicated glass waste container.

Why Choose LabEquip

Chemistry departments order fusion tubes by the pack each term, because each organic analysis practical uses at least one tube per student or group. LabEquip currently lists them in Physics Equipments; an evaporating dish is the usual vessel for holding the water into which the hot tube is plunged. Ask about pack quantities through our contact page.

Frequently Asked Questions

What is a fusion tube used for?

Mainly for Lassaigne’s sodium fusion test, in which an organic compound is heated with sodium metal to convert nitrogen, sulfur and halogens into sodium salts that can then be detected in water.

Why is the hot tube plunged into water?

Plunging breaks the tube and dissolves the sodium salts formed in the fusion, giving the sodium fusion extract. It also lets the remaining small amount of sodium react away under controlled conditions.

Why can each tube be used only once?

The tube shatters when the red-hot glass meets the water, which is how its contents are released. They are therefore treated as consumables and bought in packs.

What tests are done on the sodium fusion extract?

Nitrogen is detected by the Prussian blue test, sulfur with sodium nitroprusside or lead acetate, and halogens with silver nitrate after acidifying with nitric acid. Each test uses a separate portion of the extract.

What safety precautions apply?

Sodium must be kept away from water until the controlled plunging step, handled with dry tongs and used in very small pieces. Eye protection, a safety screen and teacher supervision are essential.

How is a fusion tube different from a test tube?

A fusion tube is much smaller and is meant to be heated directly and strongly in a flame with only a tiny amount of material inside. Ordinary test tubes are larger and are used for reactions in solution.

Last Updated: October 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
USD United States (US) dollar
Product has been added to your cart
Compare (0)