Search

In Stock

Dynamo model with magnet

Permanent magnet and precision-wound coil assembly for consistent electromagnetic interaction

Hand-driven mechanical system enabling visible, real-time electricity generation during operation

$7.73

Quick Answer: The Dynamo Model with Magnet is a hand-operated teaching generator in which a coil and a permanent magnet move relative to each other, so that mechanical work is converted into electrical energy by electromagnetic induction. Physics teachers use the dynamo model to show how generators work and how output depends on speed and field.

From Turning Handle to Electric Current

When a coil turns between the poles of a magnet, the magnetic flux linking the coil rises and falls twice every revolution. Faraday’s law says an emf is induced whenever the flux changes, and the faster it changes, the larger the emf. So the output grows with the speed of rotation, the strength of the magnet, the number of turns on the coil and the area of the coil. Each of these can be discussed with the model in front of the class, and speed can be tested directly by turning the handle slowly and then quickly with a lamp or galvanometer connected.

In a basic generator the induced current reverses every half turn, because each side of the coil moves first up and then down through the field. If the coil ends are taken out through slip rings, the output is alternating current. If they are taken out through a split-ring commutator, the connections swap every half turn and the output is a pulsing direct current. Dynamo models are made both ways, and whether this model uses slip rings or a commutator should be confirmed when ordering.

Demonstrations

  • Showing that turning faster gives a brighter lamp or larger galvanometer deflection
  • Turning very slowly with a centre-zero galvanometer to show the current reversing each half turn
  • Comparing the effort needed with and without a load to introduce Lenz’s law and energy conservation
  • Explaining how power-station generators and bicycle dynamos use the same principle

Energy and Lenz’s Law

A dynamo cannot give energy for nothing. Once a lamp is connected, current flows in the coil, and the coil in the magnetic field then experiences a force that opposes the rotation, as Lenz’s law predicts. Students feel this as extra effort on the handle. Comparing the effort with the lamp disconnected and connected is one of the most memorable ways of showing that electrical energy comes from the work done by the person turning the model.

Specifications

Type Hand-operated generator model with permanent magnet
Principle Electromagnetic induction (Faraday’s and Lenz’s laws)
Output (typical use) Small lamp, LED or centre-zero galvanometer
Topics Generators, AC and DC output, energy conversion
Slip rings or commutator, and output terminals Confirm at enquiry

Care & Handling

  • Turn the dynamo model smoothly and in the intended direction; jerking the handle strains the gears or belt.
  • Keep iron filings, pins and steel tools away from the magnet, as they are difficult to remove once attracted into the gap.
  • Do not connect the output to a mains supply or a high-voltage source.
  • Store the model covered to keep dust out of the bearings and brushes.

Why Choose LabEquip

Schools usually buy one dynamo model per class for demonstrations, with a few more where students turn it themselves in groups. LabEquip lists it in Physics Equipments; the bicycle dynamo assembly shows the same induction principle in a practical, everyday form. For construction details and output type, write to the LabEquip contact page.

Frequently Asked Questions

What is the difference between a dynamo and an alternator?

Strictly, a dynamo produces direct current through a commutator and an alternator produces alternating current through slip rings. In school use the word dynamo is often used for any small hand-driven generator, so the output type of a model is worth checking.

Why does turning faster make the lamp brighter?

The induced emf depends on how quickly the magnetic flux through the coil changes. Turning faster changes the flux more rapidly, so a larger emf is induced and more current flows through the lamp.

Where does the energy to light the lamp come from?

From the work done turning the handle. When current flows, the coil experiences a force opposing its motion, so more effort is needed. That extra work becomes electrical energy and then light and heat in the lamp.

Can the model run as a motor?

A model with a commutator will usually turn as a motor if connected to a low-voltage DC supply, which shows that motors and generators are the same machine used in reverse. A slip-ring model generally will not start by itself on DC.

How can students see that the output alternates?

Connect a centre-zero galvanometer and turn the handle very slowly. The needle swings one way and then the other during each revolution, showing the current reversing as the coil sides change direction through the field.

What does the magnet do in the model?

It provides the magnetic field that the coil cuts. A stronger magnet gives a larger flux, and so a larger output at the same speed. Large generators use electromagnets for this field instead of permanent magnets.

Last Updated: October 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
USD United States (US) dollar
Product has been added to your cart
Compare (0)