Search

In Stock

Demonstration Engine

Moteur de démonstration features a transparent, accessible design that allows for the direct observation of commutator action and brush-to-rotor contact during real-time operation.

Low-Friction Bearing System Built with precision-aligned industrial bearings to ensure consistent RPM data and minimal mechanical noise during high-fidelity energy efficiency experiments.

$19.05

Quick Answer: This demonstration motor is an open-construction direct current motor in which an armature turns between the poles of a large horseshoe magnet, with the commutator and brushes in full view. Teachers use the demonstration motor at the front of a class to explain the motor effect and why a commutator keeps the rotation going.

The Motor Effect

A wire carrying a current across a magnetic field feels a force, F = BIL, at right angles to both the field and the current; Fleming’s left-hand rule gives its direction. In a coil, the two sides carry current in opposite directions, so one side is pushed up and the other down, and the coil experiences a turning effect.

The product photograph shows the motor with a red and blue horseshoe magnet arching over the armature, all mounted on a black base whose terminals are marked as a DC input. The coil, magnet and contacts are large enough to be seen from the back of a classroom.

Why the Commutator Matters

Without help, a coil in a magnetic field would turn only until its plane faced across the field and then stop, or rock back and forth. The commutator, a ring split into segments that rotates with the coil, reverses the current in the coil every half turn through the brushes that press on it. The forces then keep acting in the same rotational direction, and the motor keeps turning.

At the instant the brushes cross the gap between segments, the coil receives no current; if it stops exactly there it will not restart on its own. A gentle flick sets it going, and this dead spot is a good prompt to explain why practical motors use armatures with many coils.

Classroom Demonstrations

  • Reversing the supply to reverse the direction of rotation
  • Turning the magnet over to show the effect of reversing the field
  • Showing that more current makes the motor turn faster and harder
  • Turning the armature by hand with a meter connected to show it can act as a generator

Specifications

Device Open-construction DC demonstration motor
Field Large horseshoe permanent magnet
Visible parts Armature, commutator and brushes
Supply Direct current, as marked on the base
Mounting Base with terminal sockets

Care & Handling

  • Supply the motor only from a low-voltage DC source within the value marked on its base
  • Keep the brushes and commutator clean; dust and grease cause sparking and erratic running
  • Store the magnet with a keeper or away from steel objects
  • Do not leave the motor stalled with the supply on

Why Choose LabEquip

An open demonstration motor helps teachers who want every student to see the commutator working before they meet sealed motors. LabEquip supplies it with the bench-scale motor module with magnets and the hand-driven electric dynamo among its physics equipment; class orders go through the contact page.

Frequently Asked Questions

Why does reversing the supply reverse the motor?

The force on each side of the coil depends on the direction of the current. Reversing the current reverses both forces, so the turning effect and the direction of rotation are reversed.

What does the commutator do?

It reverses the current in the coil every half turn. This keeps the forces turning the coil in the same direction, instead of letting it stop when its plane lies across the field.

Why does the motor sometimes not start by itself?

If the coil stops where the brushes sit on the gap between commutator segments, no current flows and there is no turning force. A small push moves it off this dead spot and it starts.

What happens if the magnet is turned over?

Reversing the magnetic field reverses the direction of rotation. Reversing both the field and the current together leaves the direction unchanged, which is a good check on understanding.

How can the speed be changed?

Raising the supply voltage increases the current and the speed, within the limit marked on the base. A stronger magnetic field also raises the turning force.

Can this motor generate electricity?

Yes. Turning the armature by hand with a sensitive meter connected produces a small voltage, showing that the same machine converts energy in either direction.

Last Updated: October 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
USD United States (US) dollar
Product has been added to your cart
Compare (0)