Quick Answer: The Boyle’s / Charles’ Ruler is a gas-law teaching aid: in its usual form, a ruler carrying a fine glass tube sealed at one end, in which a short liquid index traps a column of air. Reading the length of that air column against temperature or tube angle lets students study Charles’ law and the effect of pressure on a gas.
How the Boyle’s and Charles’ Law Ruler Works
Because the tube has a uniform bore, the volume of trapped air is its cross-sectional area multiplied by its length. The area never changes, so the length of the air column, read directly off the ruler from the sealed end to the bottom of the index, stands in for the volume. No separate volume scale is needed.
The index does two jobs. It seals the air from the atmosphere, and its own weight sets the pressure on the gas. With the tube upright and the open end at the top, the trapped air is at atmospheric pressure plus the small extra pressure of the index, and that stays constant as long as the angle of the tube does not change.
Charles’ Law in a Water Bath
For the Charles’ law practical the ruler stands vertically in a tall beaker or trough of water, sealed end down, with a thermometer beside it. The water is warmed in stages, stirred, and left until the index stops moving before each pair of temperature and length readings is taken. A graph of length against Celsius temperature is a straight line; extended backwards, it meets zero length close to minus 273 degrees Celsius, the classic estimate of absolute zero.
Tilting the ruler away from the vertical reduces the part of the index weight acting along the tube, so the pressure on the gas falls a little and the column lengthens. This gives a simple, mainly qualitative look at Boyle’s law; precise pressure-volume data come from a full Boyle’s law apparatus.
Specifications
| Usual form | Ruler carrying a fine-bore tube sealed at one end |
| Working gas | Air trapped behind a short liquid index |
| Charles’ law use | Vertical in a water bath; air-column length read at each temperature |
| Boyle’s law use | Tilted at different angles to change the pressure on the trapped air |
| Scale, bore and index liquid | Confirm at enquiry |
Practicals and Lessons
- Verifying Charles’ law by plotting air-column length against temperature
- Estimating absolute zero by extrapolating the straight-line graph
- Showing qualitatively that lowering the pressure on a trapped gas increases its volume
- Running gas-law work as a class set where larger apparatus is limited
Care & Handling
- Store the ruler upright with the sealed end down so the index does not break up or slide.
- Warm the water bath gradually and stir it; never heat the tube directly in a flame.
- Keep the ruler out of direct sunlight, which warms the trapped air and moves the index.
- Dry the scale after each water-bath session so the markings stay legible.
Why Choose LabEquip
Secondary-school physics and chemistry teachers buy these rulers in class sets because they put a gas-law experiment in every pair of hands for little bench space. LabEquip supplies them with its physics equipment range, and class quantities can be arranged through the contact page.
Frequently Asked Questions
Why can the length of the air column stand in for its volume?
The tube has a uniform bore, so the trapped volume is the cross-sectional area times the length. With the area fixed, volume is proportional to length and the length reading can be plotted directly.
How is absolute zero estimated with the ruler?
Plot air-column length against Celsius temperature and rule a straight line through the points. Extending the line back to where the length would become zero gives a temperature close to minus 273 degrees Celsius.
Why must the water be stirred and left before each reading?
The trapped air takes time to reach the temperature of the water. Stirring removes warm and cool layers, and waiting until the index stops moving makes sure the gas and the thermometer are at the same temperature.
How does tilting the tube change the pressure on the gas?
Upright, the full weight of the index adds to atmospheric pressure on the trapped air. As the tube tilts towards horizontal, only part of that weight acts along the tube, so the pressure falls and the column grows longer.
Which way up should the tube be for the Charles’ law practical?
Sealed end down, deep in the water, so the whole air column is heated evenly, with the open end above the surface. The pressure then stays constant while only the temperature changes.
How does the ruler differ from a full Boyle’s law apparatus?
A Boyle’s law apparatus varies pressure over a much wider span with a pump or reservoir and a gauge, giving accurate pressure and volume data. The ruler is a simpler bench item suited to Charles’ law and a qualitative look at pressure.
Last Updated: October 2026










Reviews
There are no reviews yet.