Search

In Stock

Bourdon Gauge

Exposed Mechanical Linkage: Integrated with a transparent acrylic face and a polished C-shaped bronze tube, allowing clear observation of the rack-and-pinion movement during pressure fluctuations.

Dual-Scale Calibration: Features high-contrast graduations measuring up to 7 bar (100 PSI) with an accuracy class of 1.6, housed in a corrosion-resistant steel casing for industrial-grade durability.

$7.73

Quick Answer: The Bourdon Gauge is a mechanical pressure gauge in which a curved, flattened metal tube tends to straighten as the pressure inside it rises; a linkage turns that small movement into the sweep of a pointer across a dial. In physics teaching the Bourdon gauge shows how most everyday pressure gauges work and reads gauge pressure in gas-law and pump experiments.

How a Bourdon Tube Measures Pressure

The heart of the instrument is a C-shaped tube with an oval cross-section, sealed at its free end and open to the pressure source at the fixed end. When the pressure inside exceeds that outside, the oval section tries to become round, and this uncurls the C slightly. The tip moves only a little, so a link, a toothed sector and a small pinion magnify the movement and rotate the pointer. Teaching versions are often built with a transparent back so the tube and gearing can be watched as pressure changes; the title does not say whether this gauge is of that kind.

Because the tube is surrounded by the atmosphere, the gauge reads gauge pressure: the difference between the pressure in the system and atmospheric pressure. Absolute pressure is found by adding the atmospheric pressure read from a barometer. This distinction is central to the gas laws, where absolute pressure must be used, and it is a common source of student error.

In a school laboratory the gauge is connected to a foot pump, a syringe or a sealed flask, and in some versions of the Boyle’s law experiment it is the pressure read-out, as in the advanced Boyle’s law apparatus with oil. The dial range, units and connection thread are not stated in the listing title and should be matched to the apparatus the gauge will serve.

Specifications

Instrument Bourdon-tube mechanical pressure gauge
Sensing element Curved tube of flattened cross-section
Reading Gauge pressure on a pointer dial
Mechanism Link, sector and pinion amplifying the tube tip movement
Dial range, units and connection Confirm at enquiry

Applications

  • Showing the inner mechanism of a mechanical pressure gauge in a pressure lesson
  • Reading pressure in Boyle’s law and gas-pressure experiments
  • Measuring the pressure built up by a foot pump or hand pump
  • Discussing the difference between gauge and absolute pressure

Care & Handling

  • Never apply pressure beyond the top of the dial; over-range permanently distorts the tube.
  • Apply and release pressure gradually, since sudden surges jar the pointer mechanism.
  • Check that the pointer reads zero with no pressure applied before each session.
  • Use the gauge only with the gases and liquids it is intended for, and keep oil and grease away from gauges used with oxygen.

Why Choose LabEquip

Physics departments buy a Bourdon gauge both as a teaching specimen of how pressure gauges work and as a working read-out for gas-law practicals. It is listed with our physics lab equipment; contact LabEquip with the range and fitting you need.

Frequently Asked Questions

What does a Bourdon gauge actually measure?

It measures gauge pressure, the amount by which the pressure inside the tube exceeds the surrounding atmospheric pressure. A reading of zero means the inside is at atmospheric pressure, not that there is no pressure at all.

How do I convert a gauge reading to absolute pressure?

Add the atmospheric pressure, read from a barometer on the day, to the gauge reading, using the same units for both. Gas-law calculations such as Boyle’s law need absolute pressure.

Why does the curved tube straighten under pressure?

The tube’s cross-section is oval. Pressure inside pushes the flat sides outwards towards a round shape, and because the tube is bent, that change in section forces the curve to open out slightly.

Why is a gear mechanism needed?

The free end of the tube moves only a small distance. The link, toothed sector and pinion magnify that movement so the pointer sweeps a large arc and can be read easily.

Can this type of gauge read pressures below atmospheric?

A standard pressure gauge cannot. Vacuum gauges and compound gauges use the same tube principle but are made to read below atmospheric pressure, so check the dial markings to see which type you have.

How often should the gauge be checked?

Look at the zero reading before each practical and compare the gauge from time to time with a reference gauge or manometer. A pointer that does not return to zero suggests the tube has been overstrained.

Last Updated: October 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
USD United States (US) dollar
Product has been added to your cart
Compare (0)