Search

In Stock

Balance, Lever

Dynamic Gravity-Based Lever System: Engineered with a precision-pivoted beam and friction-resistant knife-edges that ensure rapid stabilization and high-repeatability measurement without the need for external electronic calibration.

Integrated Dual-Scale Readout: Features a high-contrast analog interface with calibrated graduations for both metric mass and specific gravity assessments, housed in a reinforced cast-metal frame for maximum structural rigidity.

$7.33

Quick Answer: A lever balance is a direct-reading mechanical balance in which the load on a pan tilts a weighted lever and moves a pointer over a curved scale, so mass is read at a glance without weights or riders. It is used in schools for quick, repeated weighing of everyday samples.

How the Lever Balance Reads Directly

The pan sits on one arm of a lever that turns on a bearing. A fixed counterweight, often a heavy bob below the pivot, resists the turning. When a load is placed on the pan the lever rotates until the moment of the counterweight, which increases as it swings outward, equals the moment of the load. A pointer fixed to the lever then shows the new angle against a scale marked directly in mass.

Because equal increases in load do not produce equal changes of angle, the scale of a pendulum-type instrument is not uniformly divided and is calibrated point by point. Some models carry two scales, with a range change made by adding a second counterweight, so the same instrument covers a fine and a coarse range.

Direct Reading versus Rider and Weight Balances

A beam balance reaches balance only when the user moves weights or riders, whereas the lever type finds its own equilibrium. That makes it much faster for routine work such as weighing soil samples, seeds or the products of a reaction, at the cost of the finer resolution of a good beam balance. It still balances the load against a counterweight, so its reading does not change with gravity, unlike a spring scale.

Applications

  • Quick weighing of samples in junior science and biology practicals
  • Recording mass changes during evaporation, drying or germination experiments
  • Weighing ingredients and materials in home science and food technology rooms
  • Showing a self-balancing lever as an example of equilibrium of moments

Specifications

Type Single-pan, direct-reading mechanical instrument with a weighted lever
Principle Self-balancing lever with counterweight
Readout Pointer over a scale graduated in mass
Power None
Ranges, capacity and scale divisions Confirm at enquiry

Care & Handling

  • Lock the lever before carrying the balance, if a lock is fitted.
  • Check that the pointer reads zero with the pan empty and use the zero screw if it does not.
  • Keep the scale face clean and dry so the graduations stay legible.
  • Do not drop loads on the pan; a bent lever or damaged bearing spoils the calibration.

Why Choose LabEquip

Junior schools, home science rooms and biology labs buy lever balances where a class needs many quick readings in one lesson. LabEquip lists it among its physics equipment; for a spring-based direct-reading alternative see the circular compression balance, and ask about quantities through our enquiry page.

Frequently Asked Questions

What is the advantage of a lever balance over a triple beam balance?

It gives a reading immediately without moving riders, so a class can take many measurements quickly. A triple beam balance can be read more finely, but each weighing takes longer.

Why is the scale not evenly spaced?

The counterweight swings in an arc, so equal increases in load do not give equal changes of angle. The graduations are therefore spaced unevenly and are marked individually during calibration.

Does a lever balance measure mass or weight?

It measures mass, because the load is balanced against a counterweight pulled by the same gravity. A spring scale, by contrast, measures force and would read differently where gravity is weaker.

How do I set the zero?

With the pan empty and the balance on a level surface, turn the zero-adjusting screw or knob until the pointer rests on zero. Check it again whenever the balance is moved.

Can wet or dirty samples be weighed?

Yes, in a tray or beaker of known mass. Keep water and soil off the pan and pivot, and subtract the container’s mass from the reading.

How accurate are the readings?

Its accuracy depends on the scale divisions, a correct zero and a level bench. For routine school weighing it is generally adequate, while quantitative chemistry calls for a beam or analytical balance.

Last Updated: October 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
USD United States (US) dollar
Product has been added to your cart
Compare (0)