Quick Answer: The three-force equilibrium plate is a very light, irregularly shaped plate pierced with holes, whose own weight is negligible compared with the forces applied to it. Students pull the three-force equilibrium plate with two or three strings attached to force meters or hanging masses and examine the conditions for a body to stay at rest.
Why the Plate Must Be Almost Weightless
If the plate were heavy, its weight would be an extra force acting at its centre of gravity, and every analysis would have to include it. Making the three-force equilibrium plate from a very light material means the string forces, typically around a newton or more, dwarf its own small weight. The plate then behaves as a body acted on only by the forces the students apply.
The irregular outline is deliberate too. Because the plate has no symmetry, any pattern in the results cannot be explained by its shape, and students see that the rules of equilibrium hold for any body.
Two Forces, Then Three
With two strings, the plate settles only when both strings lie along the same straight line and the two force meters read the same. Two forces in equilibrium are equal, opposite and collinear.
With three strings pulling in different directions, the plate turns and shifts until it finds its rest position. Mark the line of each string on paper behind the plate and extend the lines: they meet at a single point. Then draw the three forces to scale, nose to tail, and they close into a triangle. Concurrent lines of action and a closed force triangle are the two conditions for three non-parallel forces to keep a body at rest.
Experiments
- Showing that two balancing forces are equal, opposite and collinear
- Demonstrating that three non-parallel balancing forces are concurrent
- Drawing a closed force triangle to scale from measured forces
- Comparing graphical and component methods of resolving forces
Specifications
| Product | Plate of arbitrary shape and negligible mass |
| Form | Light, irregular plate with many attachment holes |
| Principle | Equilibrium under two or three applied forces |
| Used with | Strings, force meters or hanging masses over pulleys |
| Material and size | Confirm at enquiry |
Care & Handling
- Do not overload the holes; the light material can tear if a string is jerked
- Keep the plate flat and away from heat so it does not warp
- Tie strings with small loops through the holes rather than tight knots
- Store it in a folder or flat box with the strings removed
Why Choose LabEquip
This plate is bought by schools and colleges teaching statics with real forces rather than diagrams, usually alongside force meters and pulleys on a metal board. LabEquip supplies matching magnetic pulleys and circular dynamometers with magnets within its physics lab equipment range; enquire with LabEquip for complete bench sets.
Frequently Asked Questions
Why must the plate have negligible mass?
Its weight would be an extra force acting at its centre of gravity. Keeping the plate very light makes that weight tiny compared with the string forces, so only the applied forces need to be considered.
What do the lines of action of three forces show?
When the plate is at rest, the three string lines, extended, pass through a single point. Three non-parallel forces can only balance if they are concurrent.
How is the force triangle drawn?
Choose a scale such as 1 cm per 0.2 N, draw each force in its measured direction, starting each one where the last ended. If the forces balance, the third arrow ends where the first began.
Why is the plate an irregular shape?
An irregular outline shows that the result does not depend on symmetry. Whatever shape the body and wherever the strings are attached, the same equilibrium conditions apply.
What happens with only two forces?
The plate rotates until both strings lie on one straight line, and the two forces read the same. Two balancing forces must be equal, opposite and act along the same line.
Can the forces be applied with hanging masses instead of dynamometers?
Yes. Run each string over a low-friction pulley to a hanging mass. The tension in each string then equals the weight of its mass, provided pulley friction is small.
Last Updated: October 2026










Reviews
There are no reviews yet.