Quick Answer: The 2 m air track is a hollow, straight rail drilled with rows of small holes; air blown into it escapes through the holes and lifts a glider on a thin cushion, so the glider moves along the rail with almost no friction. The 2 m air track is used for dynamics practicals on velocity, acceleration, force, momentum and energy.
What Two Metres of Track Makes Possible
On a 2 m air track a glider can travel far enough for several timing points to be taken along one run, which matters when acceleration is measured from small differences in speed. A longer run also stretches out the time taken, so the uncertainty from starting and stopping a clock becomes a smaller share of each reading.
Length helps collision work too. Two gliders can approach each other, collide near the middle and separate with room to spare before either reaches a buffer, so speeds can be measured cleanly before and after the impact. With magnets or spring bumpers the collision is close to elastic; with a pin and a wax or hook-and-loop pad the gliders stick together.
Newton’s Second Law with Constant Total Mass
A thread runs from the glider over a pulley at the end of the rail to a small hanging mass. The accelerating mass is the glider plus the hanging load, and the driving force is the weight of the hanging load. For example, a 0.20 kg glider pulled by a 10 g load accelerates at about 0.010 × 9.81 ÷ 0.21 ≈ 0.47 m/s², so it covers 1.5 m from rest in roughly 2.5 s.
To show that acceleration is proportional to force, small masses are moved one at a time from the glider to the hanger. The force rises in steps while the total mass being accelerated stays the same, and a graph of acceleration against hanging weight is a straight line through the origin whose gradient is one over the total mass.
Specifications
| Product | Linear air track (air cushion bench) |
| Length | 2 m, as titled |
| Principle | Gliders supported on an air film blown through holes along the rail |
| Typical measurements | Velocity, acceleration, momentum and kinetic energy |
| Timing options | Light gates, video analysis or a ticker timer |
| Blower, gliders and accessories supplied | Confirm at enquiry |
Experiments on the 2 m Track
- Testing F = ma by transferring masses from the glider to the hanger
- Elastic and sticking collisions between two gliders, with momentum totals before and after
- Measuring the kinetic energy lost when two gliders couple together
- Simple harmonic motion of a glider held between two springs
- Uniform motion on a level track and uniform acceleration on a slightly raised one
Care & Handling
- Never slide a glider along the rail with the air off; it scratches the bearing surface and the glider
- Clear blocked holes with a fine wire and wipe the rail with a soft, lint-free cloth
- Support the track along its length in storage so the 2 m rail cannot bow
- Keep the blower intake free of dust and paper, and level the track before every session
Why Choose LabEquip
Senior school and college departments that teach dynamics with numbers, not just observation, buy this long track for clean momentum and force data. LabEquip can quote the track with the gliders and timing you plan to use, and compare it with the air track apparatus already in our physics lab equipment range; send your class size through the contact page.
Frequently Asked Questions
What extra does a 2 m air track offer over a shorter one?
More distance per run. That gives room for several timing points, longer travel times with smaller relative timing error, and space for two gliders to collide in the middle and separate before reaching the ends.
Why move masses from the glider to the hanger instead of adding new ones?
Moving them keeps the total accelerating mass constant while the pulling force increases. Only one variable then changes, so a graph of acceleration against force should be a straight line through the origin.
How much kinetic energy is lost when two gliders stick together?
If a moving glider hits an identical one at rest and they couple, they move off at half the original speed. Momentum is conserved, but the kinetic energy afterwards is only half of what it was, the rest going to sound, heat and deformation.
Can a glider be made to oscillate on the track?
Yes. Attach a light spring from each end of the track to the glider, pull it aside and release it. With friction almost absent it oscillates for many cycles, and the period follows T = 2π√(m/k) with k as the combined stiffness of both springs.
Why does a glider still slow down slightly?
Air resistance on the glider, drag in the thin air film and a track that is not quite level all remove a little speed. Timing the glider at two gates far apart along the track shows how large this loss is.
Does the track need a separate blower?
Yes, the air cushion needs a steady flow from a blower connected to the end of the rail. Whether a blower and gliders come with this 2 m track can be confirmed at enquiry.
Last Updated: October 2026










Reviews
There are no reviews yet.