Search

In Stock

Serenit Electric Bike

₹5,569.00

Quick Answer: The Serenit electric burner, listed here as the Serenit Electric Bike, is a mains-powered bench heater used in place of a gas Bunsen burner for routine heating. The listing photo shows a spiral heating element set into the top of a moulded base, with a control knob, indicator lamps and an upright support rod at one corner.

What the Serenit Is, and Why the Odd Name

The word ‘Bike’ in this listing is a translation slip. The product line is sold in French as a ‘bec électrique’, and ‘bec’ is the everyday French word for a laboratory burner, as in ‘bec Bunsen’. What is listed here is the Serenit electric burner itself, the base unit that the Serenit rod and grid accessories in this range are named for.

Instead of burning gas, the Serenit heats with an electric element. In the photo the element is a flat spiral coil in a round recess on top of the unit, glowing red when switched on, with the control knob on the front panel and a vertical rod fixed at one corner. That rod gives a place to clamp a test tube, a ring or a thermometer over the heat, much as a retort stand would beside a gas burner.

With no gas line or cartridge, this burner suits rooms that were never plumbed for gas and schools that have removed gas taps from junior labs. It is not cool just because it is flameless: the top of the unit and anything resting on it get very hot, and the heat is harder to see than a blue flame. The Serenit Microbio version is photographed with a broad tray around the element for aseptic work; this listing is the plain model with the corner rod.

Specifications

Item Serenit electric laboratory burner (listed as ‘Serenit Electric Bike’)
Heat source Electric spiral element; no gas connection
Controls Front knob with indicator lamps, as seen in the listing photo
Support Upright rod at one corner for clamps and holders (photo)

Applications

  • Heating test tubes of water or dilute solutions in lower-secondary practicals held in rooms without gas taps
  • Warming a small beaker of liquid with a thermometer clamped to the corner rod
  • Evaporating a little salt solution in a dish to show crystals forming as the water leaves
  • Supervised heating stations at exams or open days, where loose gas tubing on benches is unwelcome

Care & Handling

  • Stand the Serenit burner on a heat-resistant, uncluttered bench, with the power cord routed away from the top of the unit.
  • Keep flammable solvents and their vapours away; a glowing element ignites them as readily as a flame does.
  • After switching off, leave the unit to cool before moving it or packing it away, because the heating zone stays hot long after the glow fades.
  • Wipe spills from the casing only when the burner is cold and unplugged, and never pour liquid onto the element.

Why Choose LabEquip

Schools converting labs away from piped gas, and departments that want a gas-free heating station for younger classes, are the usual buyers of this Serenit unit. LabEquip lists it in chemistry lab equipment alongside the removable support rod and the protection grid named for the same burner, so a complete station can be requested together through the contact page.

Related Products

Frequently Asked Questions

Why is the Serenit burner listed as an ‘Electric Bike’?

It is a translation slip. The French catalogue calls it a bec electrique, and bec is the usual French word for a laboratory burner. The Serenit Electric Bike listing is therefore the Serenit electric burner itself, the base unit that the Serenit rod, grid and plate accessories are named for.

Can the Serenit electric burner replace a gas Bunsen burner?

For routine heating, yes: warming test tubes, heating small vessels and sterilising loops can all be done on its electric spiral element without a gas supply. It gives no flame of its own, so flame tests and work that needs a flame need a gas burner, or fuel pastilles made for electric burners.

Can flammable liquids such as ethanol be used near the Serenit burner?

No. The hot element can ignite ethanol vapour just as a flame can, even though nothing is burning. Keep alcohol bottles and disinfectant sprays away from the burner while it is hot, and disinfect the bench only after it has been switched off and cooled.

What is the upright rod on the Serenit burner used for?

The rod at one corner, shown in the listing photo, works like a small retort stand: a boss head and clamp on it can hold a test tube, a thermometer or a ring over the heating element at a fixed height. The rod is removable and is also listed separately.

How long does the Serenit burner stay hot after switching off?

The spiral element and the top around it keep their heat for several minutes, and a hot element may not glow at all. Treat the unit as hot until it has had time to cool, keep it where it will not be touched, and do not pack it away warm.

What power supply does the Serenit electric burner need?

It runs from mains electricity through its own lead and has a front control knob with indicator lamps, as seen in the listing photo. No gas tap, tubing or matches are needed, so it can be used on any bench with a suitable socket.

Last Updated: November 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
INR Indian rupee
Product has been added to your cart
Compare (0)