Quick Answer: This Serenit burner support rod, listed as the ‘Removable Stem for Serenity Electric Spout’, is a straight metal rod that fits upright into the Serenit electric burner. The listing photo shows a plain steel rod with a threaded end; once fitted, it carries boss heads, clamps and rings above the heating zone.
The Listing Name Decoded
The title combines two translation slips. ‘Serenity’ is the Serenit product line, and ‘spout’ is a literal rendering of the French ‘bec’, meaning burner, while ‘stem’ is the upright rod. So this is a removable support rod for the Serenit electric burner, the same kind of rod seen standing at one corner of the Serenit electric burner in its listing photo.
A rod fixed to the burner turns it into a compact retort stand. A boss head and clamp on the rod can hold a test tube at a chosen height, a thermometer can be clamped into a beaker being warmed, and a ring can support a small funnel or gauze. Because the rod is removable, it can be taken off for storage, or when the burner is used for loop work that needs clear space around the heat.
The photo shows a threaded tip at one end, the usual way such rods are secured into a base. Before loading a clamp, check that your boss heads close firmly on the rod.
Care & Handling
- Screw the rod in by hand until firm, with the burner cold; overtightening can damage the thread in the base.
- Keep loads light and close to the rod; a heavy clamp reaching far out can tip a small burner.
- The lower part of the rod warms up near the element, so adjust clamps higher up or wait for it to cool.
- Store the rod with its burner so the pair are not separated, and keep the thread free of dried residues.
Applications
- Clamping a boiling tube at a fixed height over the Serenit heating element
- Holding a thermometer in a small beaker during a heating or cooling-curve practical
- Supporting a ring and gauze so that a small vessel sits clear of the element
- Positioning a data-logger temperature probe above the burner
Specifications
| Item | Removable upright support rod for the Serenit electric burner |
| Listed as | Removable Stem for Serenity Electric Spout |
| Form | Straight metal rod with a threaded end (photo) |
| Use | Carries boss heads, clamps, rings and thermometer holders |
Why Choose LabEquip
Owners of the Serenit burner who want to clamp apparatus without a separate retort stand are the buyers of this rod. LabEquip lists it in chemistry lab equipment next to the Serenit protection grid; complete Serenit sets can be requested through the contact page.
Related Products
- Serenit Electric Bike: The Serenit electric burner that this removable support rod is made to stand on.
- Serenit Electric Spout Protection Grid: A wire protection grid for the Serenit burner that guards the element while leaving the top open.
- Reaction plate for Sérénit electric burner: A dished reaction plate that rests over the Serenit heating element for small-scale heating.
- Boss Head Square Type: A square boss head for fixing a clamp or ring to the support rod at the height needed.
Frequently Asked Questions
What is the removable stem for the Serenit electric burner?
It is a straight metal support rod that stands upright on the Serenit electric burner. The listing photo shows a plain steel rod with a threaded fixing end. Once fitted, the rod carries boss heads, clamps, rings and thermometer holders above the heating zone, turning the burner into a compact retort stand.
Why is the Serenit support rod listed as a ‘stem’ for an ‘electric spout’?
Both words come from translating a French catalogue. Spout is a literal rendering of bec, which in a laboratory means burner, and stem stands for the upright rod. So the Removable Stem for Serenity Electric Spout is simply the removable support rod for the Serenit electric burner.
What can be clamped to the Serenit burner rod?
Any boss head whose jaws open wide enough for the rod can be used, so a clamp can hold a test tube at a chosen height over the heat, a thermometer can be held in a beaker being warmed, and a ring can carry a small funnel or a gauze. Keep the load light and centred over the burner.
Why would the rod be taken off the Serenit burner?
Removing it clears the space around the heating zone, which suits loop sterilisation and other work where a hand moves around the heat. A removable rod also lets the burner be packed flat for storage and refitted only when a clamped set-up is needed.
Does the burner support rod get hot during use?
It can. Metal conducts heat, and the rod stands next to the heating zone, so its lower part and any clamps near the heat warm up during long heating. Adjust clamps at the upper end, use a cloth or wait for it to cool before moving fittings, and never grip it right after switching off.
Is a separate retort stand better than the burner’s own rod?
A separate stand gives more height and can hold heavier glassware. The rod on the burner keeps everything on one small base, so the clamp stays in the same position relative to the heat when the burner is moved, which suits quick test-tube heating at a student bench.
Last Updated: November 2026










Reviews
There are no reviews yet.