Quick Answer: A straight cone adapter is a glass fitting with a ground-glass cone at one end and a straight tube at the other, in line with the joint. It lets rubber or plastic tubing be connected to any socket of matching size for gas, vacuum or vent lines.
The Simplest Joint-to-Tubing Link
Many ground-joint assemblies need a point where rigid glass meets flexible tubing, and this fitting is the most direct way to make it. Pushed into a socket, it continues the axis of the joint as a tube over which tubing can be slipped. Because it adds no bend and little height, it suits side necks that already point sideways, the outlet of a vacuum receiver or a horizontal socket on a manifold.
Straight adapters are also used where a set-up needs a slow bleed of gas, for example to pass nitrogen over a reaction, and on top of a reflux condenser when tubing can run straight up to a support before turning down to a trap. Compared with a bored rubber bung and glass tube, a ground cone gives a cleaner, more solvent-resistant seal in a ground-glass socket.
For connections that must be shut off at the joint, the cone adapter with stopcock is the related option.
Specifications
| Joint end | Ground-glass cone |
| Other end | Straight tube in line with the joint, for tubing |
| Function | Joins a socket to rubber or plastic tubing |
| Typical positions | Side necks, receiver outlets, manifold sockets |
Care & Handling
- Choose tubing whose bore fits snugly over the tube end; loose tubing leaks and very tight tubing is hard to fit.
- Keep the cone free of grit, which scratches ground surfaces and spoils the seal.
- Clip the cone into its socket wherever tubing could pull it loose.
- Rinse the bore after use with a solvent that removes any condensed residue.
Applications
- Gas inlet into a horizontal side neck of a two- or three-neck flask
- Vacuum or vent connection on the outlet socket of a receiver
- Replacing a bung and glass tube in a ground-joint socket for better solvent resistance
- Linking a set-up to a bubbler that shows the gas flow
Why Choose LabEquip
Teaching and research labs building ground-joint sets usually keep several straight cone adapters on hand for gas and vacuum lines. They can be ordered from LabEquip’s chemistry lab equipment range; tell us the joint size and tubing bore on the contact page.
Related Products
- Cone Adapters, Angle Connection: An angled cone adapter for vertical necks where tubing should run off to the side.
- Reduction Adapters, Reducing Interchangeable Joints: A reduction adapter for fitting this cone into a larger socket.
- Thermometer, Ground Joint (Cone Type): A ground joint thermometer with a cone, another fitting that seats directly in a socket.
- Socket To Cone With T Connection Adapters: A socket-to-cone adapter with T connection, adding a side line between two joints.
Frequently Asked Questions
What is a straight cone adapter?
It is a glass fitting with a ground-glass cone at one end and a straight tube at the other, in line with the joint. Pushed into a socket, it lets rubber or plastic tubing be connected for gas, vacuum or vent lines.
Where is a straight cone adapter used in an assembly?
It suits sockets that already point sideways, such as side necks of multi-neck flasks, the outlet of a vacuum receiver or a horizontal socket on a manifold. It adds no bend and very little height.
When should a straight adapter be replaced by an angled one?
On a vertical neck or condenser top, a straight adapter makes the tubing rise straight up, where it can be knocked or kinked. An angled adapter is better there, while the straight one suits horizontal sockets.
Can a straight cone adapter be used to vent an apparatus?
Yes. Fitted to a side neck and left open, or connected to a drying tube or bubbler, it keeps the system at atmospheric pressure while controlling what enters. Never close off a heated apparatus completely.
How do you remove tubing from a glass cone adapter?
Do not pull or twist hard on the glass. Cut the old tubing lengthwise with a blade and peel it off, or loosen it with a little warm water. Most cuts in labs come from glass tubes snapping while tubing is removed.
Can one straight adapter fit different flasks?
It fits any socket of the same standard joint size, from any maker using that standard. For a different socket size, use a reduction or expansion adapter between them.
Last Updated: November 2026










Reviews
There are no reviews yet.