Quick Answer: A socket to cone adapter with T connection is a short glass fitting with a socket at one end, a cone at the other and a side tube branching off to form a T. Fitted between two ground-joint pieces, it adds a gas inlet, outlet or vacuum point without changing the main connection.
Adding a Side Port to a Stack
Many set-ups need a gas connection at a joint that is already in use. The top of a reflux condenser is the classic example. With this adapter fitted there, cone down into the condenser socket, the socket on top stays free for a drying tube or stopper while the side tube connects to a nitrogen line and bubbler. The reaction then refluxes under an inert atmosphere and moist air cannot get in.
Placed on a condenser in a reaction that gives off hydrogen chloride or sulfur dioxide, the same side tube carries the gas to an absorption trap instead of into the room. Because the joints run straight through, the vertical path is not obstructed, and anything fitted above the adapter stays in line with the flask below.
Specifications
| Upper end | Ground-glass socket |
| Lower end | Ground-glass cone |
| Side branch | Tube forming a T, for gas or vacuum tubing |
| Main path | Straight through, in line with both joints |
Applications
- Running a reflux under nitrogen or argon with a bubbler on the side tube
- Leading acidic gases from the top of a condenser to an absorption trap
- Adding a vacuum or gas connection between a flask and a condenser or column
- Fitting a drying tube above the socket while gas enters through the side
Care & Handling
- Support the tubing on the side tube so its weight does not twist the adapter in its joint.
- Keep the gas flow gentle when the side tube is an inlet; a strong flow carries solvent vapour out through the condenser.
- Clean the side tube with a pipe cleaner and dry the adapter fully before inert-gas work, since traces of water defeat the purpose.
Why Choose LabEquip
Synthesis labs working under inert gas, and teaching labs demonstrating gas trapping, buy T adapters to add a port without replacing their flasks. LabEquip lists this adapter under chemistry lab equipments, and the socket adapter with stopcock suits connections that need a tap; send joint sizes via the contact page.
Related Products
- Two Necks Parallel Adapters: A two-neck parallel adapter that adds a second upright socket on a single-neck flask.
- Socket Adapters, Straight Connection With Stop-cock: A socket adapter with stopcock for opening and closing a line at a cone outlet.
- Cone Adapters, Angle Connection: An angled cone adapter for leading gas or vacuum lines sideways from a socket.
- Condenser, Allihn: An Allihn reflux condenser, the piece this T adapter is often fitted on top of.
Frequently Asked Questions
Where is a socket-to-cone T adapter usually fitted?
The classic position is the top of a reflux condenser: the cone goes down into the condenser socket, the socket on top stays free for a drying tube or stopper, and the side tube connects to a gas line or a trap. It adds a side port without changing the main connection.
How do I run a reaction under nitrogen using the T adapter?
Fit the adapter on top of the condenser, connect the side tube to the nitrogen supply and close or connect the top socket to an oil bubbler. A gentle flow keeps air and moisture out while the reaction refluxes, and the bubbler shows the gas is flowing.
Can the side tube of the T adapter be connected to vacuum?
Yes, with thick-walled vacuum tubing on the side tube and the top socket closed. Use only sound glass and close the line before admitting air slowly at the end, so the apparatus is not shocked by a sudden pressure change.
Why use a T adapter instead of a two-neck flask?
The adapter adds a port to apparatus already set up with a single-neck flask and a condenser. A two-neck flask gives a second port at the flask itself, which suits adding reagents, while the T adapter places the gas connection above the condenser, away from the hot liquid.
How can acid gases from a reaction be trapped using the side tube?
Lead tubing from the side tube to an inverted funnel just touching the surface of water or dilute alkali in a beaker. Gases such as hydrogen chloride or sulfur dioxide dissolve there instead of escaping into the room, and the funnel prevents suck-back.
Which way up does the T adapter go?
The cone end points down into the socket of the piece below, and the socket end faces up. Fitted this way, the joints run straight through, so items above stay in line with the flask below.
Last Updated: November 2026










Reviews
There are no reviews yet.