Search

In Stock

Condenser for Soxhlet Apparatus, Allihn

Multi-Bulb Internal Geometry: The specialized Allihn design incorporates a series of interconnected glass bulbs that significantly increase the cooling surface area, enabling high-reflux rates and superior heat exchange compared to standard Liebig models.

CNC-Ground Precision Joints: Equipped with standardized 1:10 taper interfaces and a reinforced drip tip, ensuring vacuum-tight connectivity and preventing distillate holdup during continuous, automated solvent extraction cycles.

$4.51

Quick Answer: A Soxhlet condenser of the Allihn type is a water-jacketed bulb condenser that fits on top of a Soxhlet extractor. It turns the solvent vapour rising from the boiling flask back into liquid, which drips onto the sample thimble and drives each extraction cycle.

Where the Condenser Sits in a Soxhlet Set

A Soxhlet set is built as a vertical stack: a boiling flask at the bottom, the extractor body holding the thimble in the middle, and the condenser on top. Solvent vapour travels up the extractor’s side tube, passes the thimble chamber and enters the condenser, where the cooled bulbs turn it back into liquid. The condensate falls onto the sample, fills the chamber and eventually siphons back to the flask, carrying extracted material with it.

The condenser therefore sets a limit on how fast the cycles can run. If it is too small or the water too warm, vapour escapes from the top, solvent is lost and the chamber fills slowly. Allihn bulbs create a large cooling surface in a compact height, which suits the tall assembly, and because the condensate drips straight down from the lowest bulb, bulbs cause no drainage problem in this upright position.

This listing is the condenser made for the Soxhlet extractor, as distinct from the general-purpose Allihn condenser used for reflux on a flask. The practical difference is the joint at its lower end, which must match the socket at the top of the extractor; on many Soxhlet sets that socket is wider than the joint on the flask. The listing does not give the joint size or jacket length, so quote the extractor size when ordering the condenser separately from a complete Soxhlet extraction apparatus.

Applications

  • Continuous extraction of fat from ground seeds, snacks or feeds with petroleum ether or hexane
  • Extracting chlorophyll and other leaf pigments for chromatography practicals
  • Removing caffeine from tea leaves in organic chemistry teaching
  • Replacing a broken condenser on an existing Soxhlet set of the same joint size

Specifications

Item Allihn (bulb) condenser for fitting on a Soxhlet extractor
Cooling Water jacket around a chain of bulbs
Position Vertical, at the top of the Soxhlet stack
Coolant connections Inlet low, outlet high, joined with rubber or silicone tubing

Care & Handling

  • Start the cooling water before switching on the heat, and leave it on until the flask is cool.
  • Secure the condenser with its own clamp; the joint alone should not carry its weight at the top of a tall stack.
  • If vapour reaches the upper bulbs, reduce the heat rather than turning the water up so hard that the tubing blows off.
  • Wipe solvent residue off the joint and store the condenser lying flat in a padded drawer.

Why Choose LabEquip

Food testing, oilseed and agriculture laboratories that run Soxhlet extractions for hours at a time need a condenser that keeps pace with continuous boiling. Order it alongside other chemistry lab equipment from LabEquip, quoting the extractor capacity and joint size on the contact page.

Related Products

Frequently Asked Questions

What does the condenser do in a Soxhlet apparatus?

It sits on top of the Soxhlet extractor and turns rising solvent vapour back into liquid. The condensate drips onto the sample in the thimble, fills the extraction chamber and siphons back to the flask, so each cycle extracts the sample with freshly distilled solvent.

How does a Soxhlet extraction work?

Solvent is boiled in a flask; its vapour rises through the side tube to the condenser and drips onto a porous thimble holding the solid. When the chamber fills to the top of the siphon, the solution drains back to the flask, and the cycle repeats many times.

Why is an Allihn condenser used on a Soxhlet extractor?

The bulbs give a large cooling surface in a vertical position, so solvent vapour is condensed efficiently and returned to the sample. Losing solvent from the top would slow or stop the extraction cycles.

How do you match a condenser to a Soxhlet extractor?

The lower joint of the condenser must fit the top socket of the extractor, and the jacket should be long enough for the solvent used. Choose the condenser to match the joint size of your extractor.

How should cooling water be connected on a Soxhlet condenser?

Connect the inlet at the lower connection and the outlet at the top with rubber or silicone tubing secured to the hose barbs, and start the water before switching on the heater. Check for leaks above the hot flask.

What is a Soxhlet extraction used for?

It extracts substances such as fats, oils and plant compounds from solids when they dissolve only slowly in the solvent. Fat content of foods and extraction of natural products are common teaching examples.

Last Updated: November 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
USD United States (US) dollar
Product has been added to your cart
Compare (0)