Quick Answer: The nylon 6-10 preparation kit is used to make nylon 6,10, a polyamide, by reacting a six-carbon diamine with a ten-carbon diacid chloride at the boundary of two immiscible liquids. The name of the polymer records those two carbon counts, which makes it a useful case study in how polymers are named.
What the Numbers 6 and 10 Mean
Nylons are polyamides, chains whose units are joined by amide links. When a nylon is made from two different monomers, its name gives the number of carbon atoms in each. Nylon 6,10 comes from hexane-1,6-diamine, with six carbons, and decanedioyl dichloride, the acid chloride of sebacic acid, with ten. Nylon 6,6, the common textile polymer, uses a six-carbon diacid instead.
In the reaction the diamine is dissolved in water, often with a little alkali to neutralise the acid produced, and the acid chloride in a water-immiscible solvent. At the boundary the two react so quickly that a skin of nylon 6,10 forms immediately. Gripping that skin with tweezers and lifting draws out a continuous rope, which can be wound onto a glass rod.
Acid chlorides react far faster than the acids themselves, which is why this reaction works at room temperature while industrial nylon production needs heat. For a class in which each group makes its own thread, the nylon synthesis kit for students is titled for that purpose; this kit is titled for nylon 6,10 specifically.
Applications
- Teaching polymer naming, with nylon 6,10 and nylon 6,6 as a comparison
- Demonstrating the amide link and condensation polymerisation in senior secondary or first-year college chemistry
- Winding the product onto a glass rod to estimate how much polymer forms from a set volume of reagent
- Comparing a synthetic polyamide with a natural one such as silk
Specifications
| Item | Preparation kit for nylon 6,10 |
| Monomer types | Six-carbon diamine and ten-carbon diacid chloride, as the name implies |
| Method | Interfacial polymerisation at a liquid boundary |
| Product | Polyamide (nylon 6,10) rope or thread |
Care & Handling
- Handle the acid chloride solution in a fume cupboard; it fumes in moist air and releases hydrogen chloride.
- Wear goggles and chemical-resistant gloves when dispensing either monomer.
- Wash the finished rope thoroughly in running water before it is passed round the class.
- Keep the reagent containers tightly closed and away from moisture, and check dates before use, as acid chlorides degrade on contact with water vapour.
Why Choose LabEquip
College and upper-secondary chemistry teachers covering polymers and nomenclature use a nylon 6,10 preparation to link a named polymer to its monomers. LabEquip lists this kit under chemistry lab equipment; questions about reagent quantities can be sent through the contact page.
Related Products
- Nylon Synthesis kit for Students: The student nylon synthesis kit for doing the nylon rope trick at the bench in pairs or small groups.
- Crosslinked Polymer Synthesis kit: A crosslinked polymer kit for comparing a linear polyamide with a gel made by linking chains together.
- Biodegradable Plastic Film kit: A biodegradable starch film kit, for contrasting a synthetic polymer with one made from a natural polymer.
- Laboratory Fume Cupboard with Extraction Fan: A ducted fume cupboard with extraction fan for handling the acid chloride and solvent vapours safely.
Frequently Asked Questions
Why is the polymer made with this kit called nylon 6,10?
The numbers count the carbon atoms in the two monomers. Nylon 6,10 comes from hexane-1,6-diamine, with six carbons, and decanedioyl dichloride, the acid chloride of a ten-carbon diacid. The Nylon 6-10 preparation kit therefore doubles as a lesson in how condensation polymers are named.
Why does the kit use an acid chloride instead of a carboxylic acid?
A diacid chloride reacts with an amine quickly at room temperature, so a polymer film forms at once where the two solutions meet. The carboxylic acid itself would need strong heating to drive off water, which is how nylon is made industrially but is not practical at the bench.
What small molecule is lost when nylon 6,10 forms?
Each new amide link releases a molecule of hydrogen chloride, which is why this is a condensation polymerisation. A little alkali is often added to the aqueous diamine layer to neutralise the hydrogen chloride as it forms and keep the reaction going.
How is nylon 6,10 different from nylon 6,6?
Both are polyamides made from a six-carbon diamine. Nylon 6,6 uses a six-carbon diacid, while nylon 6,10 uses a ten-carbon one, so its chains have longer hydrocarbon sections between amide links. That makes nylon 6,10 absorb less water and makes it a little more flexible.
Does the nylon 6,10 preparation need a fume cupboard?
It should be done in a fume cupboard or a well-ventilated laboratory. The acid chloride and its organic solvent give off irritating vapours, and hydrogen chloride forms during the reaction. Eye protection and gloves are needed, and the freshly drawn nylon should be washed before it is handled.
How should leftover reagents from a nylon synthesis be dealt with?
Stir the remaining two layers together so the leftover monomers react to form solid polymer, then remove and wash the solid. The liquid left still contains solvent and must be disposed of following the school or laboratory’s chemical waste procedure, not poured down the sink.
Last Updated: November 2026










Reviews
There are no reviews yet.